CONTINGENT LIABILITIES	6 Months Ended
Jun. 28, 2014
CONTINGENT LIABILITIES [Abstract]
CONTINGENT LIABILITIES	NOTE 10 - CONTINGENT LIABILITIES As of June 28, 2014, the Company was a defendant in approximately four (4) lawsuits and is aware of certain other such claims. The lawsuits fall into three general categories, traditional products liability, municipal litigation, and commercial litigation, discussed in turn below. Product Liability Litigation Two of the four lawsuits mentioned above involve claims for damages related to allegedly defective product design and/or manufacture. These lawsuits stem from a specific incident of personal injury and are based on traditional product liability theories such as strict liability, negligence and/or breach of warranty. The Company management believes that the allegations in these cases are unfounded, and that the incidents were caused by the negligence and/or misuse of the firearms by third-parties or the claimant, and that there should be no recovery against the Company. Municipal Litigation Municipal litigation generally includes those cases brought by cities or other governmental entities against firearms manufacturers, distributors and retailers seeking to recover damages allegedly arising out of the misuse of firearms by third-parties. There is only one remaining lawsuit of this type, filed by the City of Gary in Indiana State Court, over ten years ago. The complaint in that case seeks damages, among other things, for the costs of medical care, police and emergency services, public health services, and other services as well as punitive damages. In addition, nuisance abatement and/or injunctive relief is sought to change the design, manufacture, marketing and distribution practices of the various defendants. The suit alleges, among other claims, negligence in the design of products, public nuisance, negligent distribution and marketing, negligence per se and deceptive advertising. The case does not allege a specific injury to a specific individual as a result of the misuse or use of any of the Company's products. After a long procedural history, the case was scheduled for trial on June 15, 2009. The case was not tried on that date and no subsequent scheduling order has been entered. There has been no activity since that time. Commercial Litigation From time to time, the Company may be involved in commercial disputes that result in litigation. These disputes run the gamut and may involve intellectual property, real property, supply or distribution agreements, contract disputes, or other, general commercial matters. As of June 28, 2014, the Company was involved in one such lawsuit and is aware of certain other such claims. Summary of Claimed Damages and Explanation of Product Liability Accruals Punitive damages, as well as compensatory damages, are demanded in certain of the lawsuits and claims. Aggregate claimed amounts presently exceed product liability accruals and applicable insurance coverage. For claims made after July 10, 2000, coverage is provided on an annual basis for losses exceeding $5 million per claim, or an aggregate maximum loss of $10 million annually, except for certain new claims which might be brought by governments or municipalities after July 10, 2000, which are excluded from coverage. The Company management monitors the status of known claims and the product liability accrual, which includes amounts for asserted and unasserted claims. While it is not possible to forecast the outcome of litigation or the timing of costs, in the opinion of management, after consultation with special and corporate counsel, it is not probable and is unlikely that litigation, including punitive damage claims, will have a material adverse effect on the financial position of the Company, but may have a material impact on the Company's financial results for a particular period. Product liability claim payments are made when appropriate if, as, and when claimants and the Company reach agreement upon an amount to finally resolve all claims. Legal costs are paid as the lawsuits and claims develop, the timing of which may vary greatly from case to case. A time schedule cannot be determined in advance with any reliability concerning when payments will be made in any given case. Provision is made for product liability claims based upon many factors related to the severity of the alleged injury and potential liability exposure, based upon prior claim experience. Because the Company's experience in defending these lawsuits and claims is that unfavorable outcomes are typically not probable or estimable, only in rare cases is an accrual established for such costs. In most cases, an accrual is established only for estimated legal defense costs. Product liability accruals are periodically reviewed to reflect then-current estimates of possible liabilities and expenses incurred to date and reasonably anticipated in the future. Threatened product liability claims are reflected in the Company's product liability accrual on the same basis as actual claims; i.e., an accrual is made for reasonably anticipated possible liability and claims-handling expenses on an ongoing basis. A range of reasonably possible loss relating to unfavorable outcomes cannot be made. However, in product liability cases in which a dollar amount of damages is claimed, the amount of damages claimed, which totaled $1.3 million and $0.2 million at December 31, 2013 and 2012, respectively, are set forth as an indication of possible maximum liability that the Company might be required to incur in these cases (regardless of the likelihood or reasonable probability of any or all of this amount being awarded to claimants) as a result of adverse judgments that are sustained on appeal.

NOTE 10 - CONTINGENT LIABILITIES

As of June 28, 2014, the Company was a defendant in approximately four (4) lawsuits and is aware of certain other such claims. The lawsuits fall into three general categories, traditional products liability, municipal litigation, and commercial litigation, discussed in turn below.

Product Liability Litigation

Two of the four lawsuits mentioned above involve claims for damages related to allegedly defective product design and/or manufacture. These lawsuits stem from a specific incident of personal injury and are based on traditional product liability theories such as strict liability, negligence and/or breach of warranty.

The Company management believes that the allegations in these cases are unfounded, and that the incidents were caused by the negligence and/or misuse of the firearms by third-parties or the claimant, and that there should be no recovery against the Company.

Municipal Litigation

Municipal litigation generally includes those cases brought by cities or other governmental entities against firearms manufacturers, distributors and retailers seeking to recover damages allegedly arising out of the misuse of firearms by third-parties.

There is only one remaining lawsuit of this type, filed by the City of Gary in Indiana State Court, over ten years ago. The complaint in that case seeks damages, among other things, for the costs of medical care, police and emergency services, public health services, and other services as well as punitive damages. In addition, nuisance abatement and/or injunctive relief is sought to change the design, manufacture, marketing and distribution practices of the various defendants. The suit alleges, among other claims, negligence in the design of products, public nuisance, negligent distribution and marketing, negligence per se and deceptive advertising. The case does not allege a specific injury to a specific individual as a result of the misuse or use of any of the Company's products.

After a long procedural history, the case was scheduled for trial on June 15, 2009. The case was not tried on that date and no subsequent scheduling order has been entered. There has been no activity since that time.

Commercial Litigation

From time to time, the Company may be involved in commercial disputes that result in litigation. These disputes run the gamut and may involve intellectual property, real property, supply or distribution agreements, contract disputes, or other, general commercial matters. As of June 28, 2014, the Company was involved in one such lawsuit and is aware of certain other such claims.

Summary of Claimed Damages and Explanation of Product Liability Accruals

Punitive damages, as well as compensatory damages, are demanded in certain of the lawsuits and claims. Aggregate claimed amounts presently exceed product liability accruals and applicable insurance coverage. For claims made after July 10, 2000, coverage is provided on an annual basis for losses exceeding $5 million per claim, or an aggregate maximum loss of $10 million annually, except for certain new claims which might be brought by governments or municipalities after July 10, 2000, which are excluded from coverage.

The Company management monitors the status of known claims and the product liability accrual, which includes amounts for asserted and unasserted claims. While it is not possible to forecast the outcome of litigation or the timing of costs, in the opinion of management, after consultation with special and corporate counsel, it is not probable and is unlikely that litigation, including punitive damage claims, will have a material adverse effect on the financial position of the Company, but may have a material impact on the Company's financial results for a particular period.

Product liability claim payments are made when appropriate if, as, and when claimants and the Company reach agreement upon an amount to finally resolve all claims. Legal costs are paid as the lawsuits and claims develop, the timing of which may vary greatly from case to case. A time schedule cannot be determined in advance with any reliability concerning when payments will be made in any given case.

Provision is made for product liability claims based upon many factors related to the severity of the alleged injury and potential liability exposure, based upon prior claim experience. Because the Company's experience in defending these lawsuits and claims is that unfavorable outcomes are typically not probable or estimable, only in rare cases is an accrual established for such costs. In most cases, an accrual is established only for estimated legal defense costs. Product liability accruals are periodically reviewed to reflect then-current estimates of possible liabilities and expenses incurred to date and reasonably anticipated in the future. Threatened product liability claims are reflected in the Company's product liability accrual on the same basis as actual claims; i.e., an accrual is made for reasonably anticipated possible liability and claims-handling expenses on an ongoing basis.

A range of reasonably possible loss relating to unfavorable outcomes cannot be made. However, in product liability cases in which a dollar amount of damages is claimed, the amount of damages claimed, which totaled $1.3 million and $0.2 million at December 31, 2013 and 2012, respectively, are set forth as an indication of possible maximum liability that the Company might be required to incur in these cases (regardless of the likelihood or reasonable probability of any or all of this amount being awarded to claimants) as a result of adverse judgments that are sustained on appeal.