<DOCUMENT>
<TYPE>EX-1.02
<SEQUENCE>2
<FILENAME>ex1-01.txt
<TEXT>
                                                          EXHIBIT 1.01




                            UNISYS CORPORATION
                         CONFLICT MINERALS REPORT
                            REPORTING YEAR: 2013

COMPANY OVERVIEW

Unisys Corporation ("Unisys") is a worldwide information technology
("IT") company. We provide a portfolio of IT services, software, and
technology.  We operate in two business segments - Services and
Technology. In the Technology segment, we design and develop servers,
software and related products.

Early in 2013 Unisys determined that certain of its products were likely
to contain conflict minerals, as that term is defined by Rule 13p-1 under
the Securities Exchange Act, due to the anticipated presence of such
minerals in parts obtained from suppliers, either contract manufacturers
or original equipment manufacturers (OEM), or from utilization of
conflict minerals in manufacturing processes employed by Unisys
suppliers.  Supplier parts obtained by Unisys are utilized in the
assembly of Unisys enterprise servers and other electronic equipment.
Unisys is not a vertically integrated manufacturer and instead focuses on
systems integration through the purchase of higher level assemblies and
OEM products.  Unisys is therefore several levels removed from the actual
mining of conflict minerals.  Unisys does not make purchases of raw ore
or unrefined conflict minerals and makes no purchases in the Democratic
Republic of the Congo or an adjoining country.  Unisys has a Conflict
Minerals Policy that is available on its website at www.unisys.com under
"About Unisys" in "Social Responsibility - Conflict Minerals."

REASONABLE COUNTRY OF ORIGIN INQUIRY

Subsequent to Unisys initial assessment that certain supplier parts
likely contain conflict minerals, Unisys conducted a reasonable country
of origin inquiry (RCOI) to determine which Unisys-utilized parts contain
conflict minerals and whether such conflict minerals originated in the
Democratic Republic of the Congo or an adjoining country.  Unisys
contacted each of its suppliers and asked them to provide information on
(1) the conflict minerals contained in each of the parts supplied by that
supplier and (2) the source of the conflict minerals, including
smelter/refinery information and location of mines.  Each supplier was
asked to complete the Electronic Industry Citizenship Coalition Global e-
Sustainability Initiative (EICC-GeSI) Conflict Minerals Reporting
Template.  Of the 67 suppliers identified as supplying Unisys with
product in 2013 and subsequently contacted, 34 replied with some conflict
minerals data.  Based on those responses, Unisys determined that conflict
minerals present in certain of its products, as well as conflict minerals
utilized in the production of certain supplier parts, may have originated
in the Democratic Republic of the Congo or an adjoining country and were
not from scrap or recycled sources.  Therefore, in accordance with Rule
13p-1 under the Securities Exchange Act, Unisys proceeded to engage in
due diligence regarding the sources and chain of custody of its conflict
minerals.

DUE DILIGENCE - STANDARD UTILIZED

Unisys designed its due diligence framework to conform in all material
respects with the framework provided by The Organization for Economic Co-
operation and Development (OECD) Due Diligence Guidance for Responsible
Supply Chains of Minerals from Conflict-Affected and High-Risk Areas, an
internationally-recognized due diligence framework.

DUE DILIGENCE - PROCESS

The Unisys due diligence exercise included:

1.  Submitting the EICC - GeSI Conflict Minerals Reporting Template to
each supplier of parts potentially containing conflict minerals.  That
template provided a standardized method for Unisys use in the collection
of representations, statements and data from Unisys suppliers relative to
the presence, use, source and chain of custody of conflict minerals in
supplier parts that are incorporated in Unisys products for sale to end-
use customers.

2. Submitting the EICC-GeSI's Smelter Reference List, which is a
compilation of names and locations of known smelters and refiners, to
each supplier of parts potentially containing conflict minerals.

3. Comparing smelters identified in the reporting templates against
the list of smelter facilities which have been identified as "conflict
free" by the EICC-GeSI Conflict Free Sourcing (CFS) program.  The CFS
program is a voluntary program whereby an independent third party
evaluates smelter procurement activities to determine whether a smelter
has sufficiently demonstrated that all materials processed by that
smelter originated from sources that do not directly or indirectly
finance or benefit armed groups in the Democratic Republic of the Congo
or an adjoining country.

In numerous instances Unisys received, after repeat inquires, conflicting
or incomplete information regarding those facilities utilized to process
necessary conflict minerals in supplier parts, as well as insufficient
information regarding the mine(s) or source(s) of origin of those
conflict minerals.  Nevertheless, each supplier response was evaluated
and, where possible, validated to determine sufficiency, accuracy or
completeness of its response.  For each supplier response, Unisys
subsequently assessed whether the conflict minerals identified, or those
conflict minerals that may not have been identified, were consistent with
the nature and characteristics of the supplied part. For each supplier
response that was insufficient, potentially inaccurate or incomplete,
Unisys contacted that supplier for follow up, sometimes contacting
certain suppliers on multiple occasions.  When a supplier EICC-GeSI
response stated that conflict minerals were sourced from the Democratic
Republic of the Congo or an adjoining country and identified the smelter
involved, Unisys endeavored to verify whether the smelter referenced by
the supplier was identified on the EICC-GeSI Conflict Free Smelter List.
If a supplier stated that conflict minerals in its product were not
sourced from the Democratic Republic of the Congo or an adjacent country
but did not substantiate that information, Unisys proceeded to verify
that supplier response.  Typically, verification involved a more detailed
review of the supplier's smelter response and, where possible, discussion
with the supplier.  If a supplier's response could not be validated
through details provided to Unisys with regard to the smelter and/or
smelters involved, then the supplier response in question was determined
to be uncertain or unknown relative to the question of sourcing of raw
material and was reflected as such in the Unisys EICC-GeSI template
summary.

DUE DILIGENCE - RESULTS

Of the 185 smelters identified, 62 were on the CFS list.  Given the fact
that not all smelters identified were on the CFS list and the number of
supplier responses that were determined to be uncertain or unknown
relative to the question of sourcing of raw materials, Unisys due
diligence efforts in 2013 were unable to precisely determine whether or
not all supplier parts in its supply chain contain necessary conflict
minerals or, in the alternative, utilized conflict minerals in their
manufacture, that either financed or benefited, directly or indirectly,
armed groups in the Democratic Republic of the Congo or an adjoining
country.  As such, Unisys due diligence in 2013 found that Unisys
products containing or utilizing conflict minerals are DRC conflict
undeterminable.

RISK MITIGATION - IMPROVEMENT PROGRAM

The steps that Unisys will take in reporting year 2014 to mitigate the
risk that Unisys conflict minerals benefit or finance armed groups are as
follows:

1. Unisys will continue to work with suppliers who provided incomplete
or insufficient information in an effort to obtain compete and accurate
information in 2014;

2. Unisys will again request information and supporting data from each
supplier  providing parts to Unisys  that are subject to 2014 reporting
requirements by utilizing the EEIC-GeSI Conflict Minerals Reporting
Template; and will pursue a completed template response that identifies
material down to the smelter and mine.

3. Unisys will again follow its due diligence process to review and
validate supplier responses that are obtained in support of Unisys 2014
conflict minerals reporting.

4. Unisys will provide its Conflict Minerals Policy to suppliers as part
of its EEIC-GeSI Conflict Minerals Reporting Template based supplier
inquiry process for 2014.

5. Unisys has included a conflict minerals clause in its purchase order
standard terms and conditions and is adding a conflict minerals clause to
its agreement templates for incorporation in new agreements.  Current
Unisys agreements will be reviewed and a conflict minerals clause will be
added as required.

PRODUCT DESCRIPTION

A list of parts used in Unisys enterprise servers and other electronic
equipment for which Unisys solicited supplier information regarding
conflict mineral content or conflict mineral use in production is
attached as Exhibit A.




<PAGE>


                         Conflict Minerals Report
                                Exhibit A
       Description of Unisys Corporation's 2013 Products (Parts/Supplies)

PRODUCT DESCRIPTION

Sheet Metal & Electro-mechanical Assemblies
Electronic Parts & Assemblies
Fasteners & Labels
Cables & Harnesses
Power Supplies
Computer/Server Products
Network Switches
Printed Circuit Boards (laminates)
Printed Circuit Assemblies
Displays/Monitors
Keyboards
Memory Modules/Security Devices
Molded Plastic Parts
Sheet Metal Parts & Assemblies
Computer Cabinets & Accessories
Power Strips
Thermal Transfer Products
Flex Circuits
Solder


</TEXT>
</DOCUMENT>
