The information communicated within this announcement is deemed to constitute inside information as stipulated under the Market Abuse Regulations (EU) No. 596/2014 as it forms part of UK domestic law by virtue of the European Union (Withdrawal) Act 2018 ("MAR"), and is disclosed in accordance with the Company's obligations under Article 17 of MAR. Upon the publication of this announcement, this inside information is now considered to be in the public domain.
Surface Transforms plc
("Surface Transforms" or "the Company")
Trading and operational progress update and AGM presentation
Surface Transforms (AIM:SCE), manufacturers of carbon fibre reinforced ceramic automative brake discs, announces the following trading and operational progress updated for the six months ended 30 June 2025 ("H1 2025").
Financial review
The Company has experienced a pivotal change in manufacturing yield and output, with the benefits of these improvements being realised throughout the second quarter of 2025 ("Q2 2025"). Revenue for H1 2025 is expected to be approximately £8.1m (H1 2024: £4.7m), representing an increase of 72%.
Average manufacturing yield increased to 77% in Q2 2025 from 49% in Q1 2025. The Company has continued to address ramp up challenges and delivered reductions in process variation and production disruption in Q2 2025, resulting in significant yield improvements. Work now continues to realise further yield improvements. It is important to note that at current levels of average yield, we have sufficient installed manufacturing capacity to deliver to customer order patterns and become financially sustainable.
Key customers have and continue to be highly supportive of the Company, and we remain hugely appreciative. Their support has facilitated the operational progress achieved during H1 2025 including total cash advances to 30 June 2025 of £12.9m. The Company remains in negotiations regarding the settlement of these advances, with repayments expected to commence in H2 2025.
Gross cash as at 30 June 2025 was £1.2m (31 December 2024: £0.5m). Careful cash management has been required to support the operational improvements made in yield, output and trading. While operational improvements are easing cash constraints, we remain focused on steadily managing our way through the remainder of this year with discipline.
The Company continued to draw down from its £13.2m ERDF loan in H1 2025, solely for use against capital expenditure. As at 30 June 2025, £9.8m had been drawn down (31 December 2024: £4.9m), with further drawdowns planned during H2 2025. The balance of the loan facility is expected to be fully invested by the end of 2025.
Operational progress
The Company is focused on sustaining these new levels of operational performance with H2 2025 revenues forecast to grow by approximately 20% compared to H1 2025. The Company anticipates receiving £2.5m of cash in H2 2025 from VAT receipts and R&D tax credits and expects the £12.9m customer cash advances to reduce by about 20%. As a result, the Company anticipates gross cash of around £1.0m at the end of 2025.
From a management perspective, Stephen Easton has decided to step down from his role as COO. He has been replaced by Gareth Laker, effective from 1 August 2025. Gareth has been with Surface Transforms for two years as the Manufacturing Technology Manager and has been a key member of the team in delivering our operational improvement in yield and output. Gareth brings his previous experience as an international automotive plant manager to the role.
Kevin Johnson (CEO) said:
"Since November 2024, the Board has been focused solely on operational improvement and cash management. During Q2 2025 we started to deliver sustainable improvements in output, yield and quality and we are cautiously confident this level of performance will be maintained in the second half of the year and beyond. We remain mindful that there is room for further operational improvements which in turn will ease the financial stress the business has endured.
"The support of customers has been unwavering, and it is hugely appreciated. Shareholders have remained patient, and we are focused on delivering value to them. Every member of the Surface Transforms team has shown incredible resilience through challenging times, and I am delighted that we are now realising the rewards of their hard work.
"While there remains a lot still to do we are encouraged that a pivotal change has occurred."
AGM presentation
Following the conclusion of the Annual General Meeting ("AGM") today, Kevin Johnson (CEO) will provide a presentation on this H1 2025 trading and operational progress. The presentation will be available on the Company's website .
For enquiries, please contact:
|
|
Surface Transforms plc |
+44 151 356 2141 |
||
|
|
Ian Cleminson, Non-Executive Chairman |
|
||
|
|
Kevin Johnson CEO Steve Harrison, Interim CFO
|
|
||
|
|
|
|
||
|
|
Zeus (Nominated Adviser and Broker) |
+44 203 829 5000 |
||
|
|
David Foreman / James Edis / Ed Beddows (Investment Banking) |
|
||
|
|
Dominic King (Corporate Broking) |
|
||
| |
|
|
||
About Surface Transforms
Surface Transforms plc. (AIM:SCE) develops and produces carbon ‐ ceramic material automotive brake discs. The Company is the UK's only manufacturer of carbon ‐ ceramic brake discs, and only one of two mainstream carbon ceramic brake disc companies in the world, serving customers that include major OEMs in the global automotive markets.
The Company utilises its proprietary next generation Carbon Ceramic Technology to create lightweight brake discs for high ‐ performance road and track applications for both internal combustion engine cars and electric vehicles. While competitor carbon ‐ ceramic brake discs use discontinuous chopped carbon fibre, Surface Transforms interweaves continuous carbon fibre to form a 3D matrix, producing a stronger and more durable product with improved heat conductivity compared to competitor products; this reduces the brake system operating temperature, resulting in lighter and longer life components with superior brake performance. These benefits are in addition to the benefits of all carbon ‐ ceramic brake discs vs. iron brake discs: weight savings of up to 70%, longer product life, consistent performance, reduced brake pad dust and corrosion free.
The Company holds the London Stock Exchange's Green Economy Mark.
For additional information please visit www.surfacetransforms.com
RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our Privacy Policy.