Exhibit 1.02
The Coast Distribution System, Inc.
Conflict Minerals Report
This is the Conflict Minerals Report (this “Report”) of The Coast Distribution System, Inc., a Delaware corporation (the
“Company”, “we,” “us” or “our”) for calendar year 2013, which has been prepared in accordance with Rule 13p-1 (“Rule 13p-1”) under the Securities Exchange Act of 1934, as amended, and Form
SD. Certain terms used and not defined in this Report are defined in Form SD.
Introduction
Rule 13p-1 was adopted by the Securities and Exchange Commission (“SEC”) to implement reporting and disclosure requirements related
to conflict minerals as directed by Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 (“Dodd-Frank Act”). The Rule imposes certain reporting obligations on companies that are registered with the SEC
(each, a “Registrant”) that manufacture or contract for the manufacture of any products that contain “conflict minerals” which are necessary to the functionality or production of any of those products. For the purposes of this
assessment, “conflict minerals” are currently defined to include gold, cassiterite, columbite-tantalite, wolframite, and their derivatives, which are limited to tin, tantalum, and tungsten. These requirements apply to a Registrant
regardless of the geographic origin of the conflict minerals and regardless of whether the conflict minerals may fund armed conflict.
If
a Registrant is able to establish that the conflict minerals originated from sources other than the Democratic Republic of the Congo or an adjoining country (collectively, the “Covered Countries”), or from recycled and scrap sources, it
must submit a Form SD which describes its reasonable country of origin inquiry that led to that conclusion. Alternatively, if a Registrant has reason to believe that any of the conflict minerals in its supply chain may have originated in the
Covered Countries, or if it is unable to determine the country of origin of the conflict minerals, then the Registrant must exercise due diligence on the source and chain of custody of the conflict minerals. Each year thereafter, the Registrant must
submit a Conflict Minerals Report to the SEC that includes a description of the due diligence measures taken.
We have evaluated our
products and supply chain and have determined that certain of the products we contract to manufacture contain one or more conflict minerals that are necessary to the functionality of those products. We have conducted a good faith, reasonable country
of origin inquiry regarding the conflict minerals. As a result of the reasonable county of origin inquiry, we exercised due diligence on the source and chain of custody of the conflict minerals using an internationally recognized due diligence
framework for that purpose. Based on that due diligence review, we have concluded that the sourcing of the conflict minerals used in those products is presently “DRC conflict undeterminable.” Accordingly, we have prepared this Report
pursuant to Rule 13p-1 and Form SD. This Report is not required to be, and has not been, subjected to an independent private sector audit.
The design of our conflict minerals due diligence process described below
conforms in all material respects with the internationally recognized due diligence framework set forth in the 2nd Edition of The Organisation for Economic Co-operation and Development (the “OECD”) Due Diligence Guidance for Responsible
Supply Chains of Minerals from Conflict-Affected and High Risk Areas, as further set out in the specific guidance contained in the Supplement on Tin, Tantalum, and Tungsten and the Supplement for Gold (collectively, the “OECD Guidance”).
Due Diligence Process
Our due
diligence process includes the following key elements: (i) adopting a Conflict Minerals Policy, (ii) establishing strong internal management systems, (iii) identifying risks in our supply chain, and implementing a strategy to respond
to those risks, (iv) utilizing industry efforts to influence smelters and refineries to obtain audits and become certified, (v) training employees and encouraging reporting of violations of the Conflict Minerals Policy, and
(vi) publicly reporting on our supply chain due diligence policies and practices. Each component of our due diligence process is addressed in greater detail below.
1
Conflict Minerals Policy. Effective as of January 27, 2014, we adopted the following
Conflict Minerals Policy as required by the OECD Guidance:
“Coast Distribution
System, Inc. is aware of the violence and human rights violations taking place in connection with the mining of conflict mineral ores in the Democratic Republic of the Congo and surrounding countries (Conflict Region). As a good corporate citizen
Coast Distribution System, Inc. respects human rights and will not contribute to conflict in this area.
In compliance with Section 1502 of the Dodd Frank Wall Street Reform Act, Coast
Distribution System, Inc. is undertaking due diligence actions to ensure that any tin, tantalum, tungsten or gold in our products is not sourced from mines in the Conflict Region controlled by non-government military groups, or unlawful military
factions. We expect our suppliers to do the same.
This policy is effective this 27 day of January, 2014.”
We have communicated this policy to our suppliers and the public. A copy of our Conflict Minerals Policy is available on our website at
http://www.coastdistribution.com/CoastDistributionCMPolicyStatement.pdf
Internal Management Systems. We have structured our
internal management team to support our supply chain due diligence process by, among other things, designating a conflict minerals program manager to lead the implementation of our conflict minerals compliance strategy. In addition, we have
established a system of controls and transparency over our supply chain using the Electronic Industry Citizenship Coalition (“EICC”) and the Global eSustainability Initiative (“GeSI”) Conflict Minerals Reporting Template
(“CMRT”) as a reporting mechanism to determine conflict minerals sources for our products. Utilizing these generally accepted industry tools, we conducted a survey of all of our suppliers with which we contract to manufacture products and,
in the course of our exercise of due diligence, we received responses from more than 95% of these suppliers.
Supply Chain Risks.
We have taken steps to identify and assess risk in our supply chain by seeking to identify smelters and refiners of conflict minerals in our supply chain through industry-wide schemes to disclose upstream actors in the supply chain, including
the Conflict-Free Smelter Program (“CFSP”) of the Conflict-free Sourcing Initiative (“CFSI”), an initiative of the EICC and GeSI. To date we have been able to identify one smelter, PT Koba Tin (CFSP ID# 2IDN036). One or more
refineries or additional smelters may be identified as part of our data collection process and our continued due diligence efforts in future years.
Audit and Certification. We do not have any direct relationships with smelters or refiners and we do not perform direct audits of
entities that provide our supply of conflict minerals. However, we do rely upon industry efforts, such as those under the CFSI, to influence smelters and refineries to obtain audits and become certified through the CFSP.
Employee Training and Reporting of Violations. We have mechanisms in place whereby employees can report violations of our various
corporate governance policies, including our Conflict Minerals Policy. We have also provided training on our Conflict Minerals Policy to our employees who are involved in manufacturing and supply chain and, in doing so, have encouraged these
employees to report any violations.
Public Reporting of Due Diligence Policies. As discussed above, Rule 13p-1 imposes certain
reporting obligations on companies that are registered with the SEC whose manufactured products contain conflict minerals which are necessary to the functionality or production of their products. Because we are unable to determine the country of
origin of the conflict minerals used in our products, we are required to exercise due diligence on the source and chain of custody of the conflict minerals and to submit, annually, a Conflict Minerals Report to the SEC that includes a description of
the due diligence measures taken.
2
Risk Mitigation / Future Due Diligence Measures
We believe that the activities described in the “Due Diligence Process” section above mitigate the risk that our conflict minerals
directly or indirectly benefited armed groups that are perpetrators of human rights abuses in the Covered Countries. We intend to take the following additional steps in our due diligence process:
| |
• |
|
Evaluate our current suppliers of contracted-for products based on their responsiveness to our ongoing data collection and due diligence efforts. Any of those suppliers whose products pose a risk of conflict mineral
content that requires reporting, but whose response was limited or non-existent for calendar year 2013, will be considered for replacement if that supplier is unable to provide us the requested data for calendar year 2014. |
| |
• |
|
Evaluate all potential new suppliers of products which present a risk of conflict mineral content, whether for existing or future products which the Company manufactures or contracts to have manufactured, for their
capacity to respond in an accurate and timely manner to requests for conflict mineral data. |
| |
• |
|
Require all current and new suppliers of products that present a risk of conflict mineral content to implement appropriate due diligence procedures for the purpose of tracing the supply chain upstream to refineries and
smelters certified by the CFSP as “DRC conflict free.” |
| |
• |
|
Enhance our supplier communication, training and reporting processes to improve due diligence accuracy. |
| Part 2. |
Product Descriptions |
A list of our products that are subject to the conflict mineral
reporting requirements of Form SD is set forth in Table 1 below.
Facilities Used to Process Necessary Conflict Minerals for
Products. To date we have been able to identify one smelter, PT Koba Tin (CFSP ID# 2IDN036). One or more refineries or additional smelters may be identified as part of our data collection and continued due diligence efforts in future years.
Country of Origin of Necessary Conflict Minerals. Notwithstanding our due diligence efforts, we have been unable to identify the
countries of origin of any conflict minerals necessary to the functionality of the products that we have contracted for manufacture.
Efforts to Determine the Mine or Location of Origin. The Company supports the CFSP, which is focusing on smelters as a choke point in
the global metals supply chain through which all ores must pass. We intend to work with our suppliers to achieve sourcing of conflict minerals only from CFSP certified conflict-free smelters and refiners. Our participation in the CFSP constitutes
the industry-standard method of determining the mine or location of origin with the greatest possible specificity because, once ores are smelted or refined, it is not possible to trace back to the mine or location of origin.
3
Table 1 - Product Description
|
|
|
| Product No. |
|
Description |
| 31568 |
|
26K CROSS MEMBER |
| 31567 |
|
16K CROSS MEMBER |
| 31249 |
|
LIFT UNIT ASSEMBLY |
| 31569 |
|
16K HITCH HOUSING/YOKE/HEAD |
| 31570 |
|
26K HITCH HOUSING/YOKE/HEAD |
| 30506 |
|
DRAW BAR 800LB RND W/CHAINS |
| 30546 |
|
DRAW BAR 1200LB RND W/CHAINS |
| 30550 |
|
DRAW BAR 1400LB RND W/CHAINS |
| 31371 |
|
CHAIN KIT FOR WD KITS |
| 31671 |
|
HEAD BOLT |
| 31976 |
|
1/2-13UNC X 3.75 HEX HEAD BOLT |
| 32060 |
|
SHANK |
| 32061 |
|
HEAD ASSEMBLY F/RND BAR HITCH |
| 32062 |
|
LIFT UNIT ASSEMBLY |
| 32063 |
|
HANDLE |
| 32064 |
|
HARDWARE KIT F/ROUND BAR WD |
| 40321 |
|
LEVEL MULTI-SURFACE (40482) |
| 68665 |
|
RUBBER ROOF KIT (65213) |
| 31285 |
|
BALL 2-5/16X1-1/4 12K (39386) |
| 31972 |
|
BALL 2X1-1/4X2-5/8-UNASSEMBLED |
| 31998 |
|
SCREW KIT PK/8 |
| 98679 |
|
BOX ONLY FOR HB3000 |
| 98680 |
|
SKIN ONLY FOR HB3000 |
| 13339 |
|
BATTERY STRAP KIT,42IN BULK |
| 20566 |
|
T VALVE LOWER V4,1EA REG ABS |
| 20567 |
|
T VALVE UPPER V4,1EA REG ABS |
| 20568 |
|
COUPLER SWIVEL V4,1EA PP MAT’L |
| 20569 |
|
COUPLER NUT V4,1EA POLY MAT’L |
| 20570 |
|
O-RING ADAPTER V4 1EA, ABS MAT |
| 20571 |
|
REAR WHEEL SPACER, WHITE |
| 20806 |
|
V6 COUP NUT BUTTRESS ABS,BLK |
| 90117 |
|
CARDS F/65485 FAN BLADES |
| 90118 |
|
BLISTER FOR FAN BLADES |
| 20657 |
|
SGL LED EC-LTE,BWHT,OPT NO BLB |
| 20658 |
|
DBL LED EC-LTE,BWHT,OPT NO BLB |
| 20659 |
|
LED SCARE LITE,BWHT,CLR NO BLB |
| 20660 |
|
LED PORCH LITE,BWHT,CLR NO BLB |
| 20661 |
|
LED P-LTE,BWHT,CLR W/SW NO BLB |
| 20662 |
|
SGL LED EU-LTE,BWHT,WHT NO BLB |
| 20663 |
|
SGL LED EU-LTE,BWHT,OPT NO BLB |
| 20664 |
|
DBL LED EU-LTE,BWHT,WHT NO BLB |
| 20666 |
|
DBL LED EU-LTE,BWHT,OPT NO BLB |
| 20717 |
|
SGL LED EU-LITE,SFT,OPT NO BLB |
| 20718 |
|
DBL LED EU-LITE,SFT,OPT NO BLB |
| 20721 |
|
SGL LED EU-LITE,SFT,WHT NO BLB |
| 20722 |
|
DBL LED EU-LITE,SFT,WHT NO BLB |
| 20723 |
|
SGL LED EC-LITE,SFT,OPT NO BLB |
|
|
|
| Product No. |
|
Description |
| 31350 |
|
5TH WHEEL DISPLAY STAND |
| 31370 |
|
WD DISPLAY STAND |
| 33842 |
|
SWAY CONTROL BALL |
| 33844 |
|
BALL 1-7/8X3/4X1-3/4 CHROME |
| 33846 |
|
BALL 1-7/8X1X2/1/8 CHROME |
| 33849 |
|
BALL 2 X 3/4 X1-3/4 CHROME |
| 33850 |
|
BALL LS 2X3/4X2-5/16 CHROME |
| 33851 |
|
BALL 2X1X2-1/8 CHROME |
| 33852 |
|
BALL LS 2X1X2-7/8 CHROME |
| 33853 |
|
BALL 2X1-1/4X2-5/8 CHROME |
| 33855 |
|
BALL 2-5/16X1X2-1/8 CHROME |
| 34915 |
|
BALL 1-7/8X3/4X1-3/4 CHR PAK/1 |
| 34917 |
|
BALL 2X3/4X1-3/4 CHR PAK/1 |
| 34918 |
|
BALL 2X1X2-1/8 CHR PAK/1 |
| 34919 |
|
BALL 2-5/16X1X2-1/8 CHR PAK/1 |
| 34924 |
|
BALL LS 2X1X2-7/8 CHR PAK/1 |
| 39386 |
|
BALL 2-5/16X1-1/4X2-5/8 CHR |
| 30849 |
|
1200LB WDH W/SWAY/BALL-2-5/16 |
| 31331 |
|
501-800# WDH P-TRUNNION |
| 31335 |
|
801-1200# WDH P-TRUNNION |
| 31421 |
|
400-600# WDH RD BAR |
| 31422 |
|
501-800# WDH RD BAR |
| 31423 |
|
801-1200# WDH RD BAR |
| 31425 |
|
1001-1400# WDH RD BAR |
| 31427 |
|
501-800# WDH L/SHANK RB |
| 31428 |
|
801-1200# WDH L/SHANK RB |
| 31620 |
|
800# WDH TRUN W/SWAY & BALL |
| 31621 |
|
1200# WDH TRUN W/SWAY & BALL |
| 31986 |
|
600LB WDH W/SWAY/BALL-2-5/16IN |
| 31995 |
|
600LB WDH W/SWAY/BALL-2IN |
| 31996 |
|
800LB WDH W/SWAY/BALL 2IN |
| 31997 |
|
800LB WDH W/SWAY/BALL 2-5/16 |
| 31313 |
|
16K-S 5TH WHEEL HEAD/X-MEMBER |
| 31452 |
|
REPL XS-16 CROSS MEMBER KIT |
| 31453 |
|
REPL XS-16 HEAD ASSEMBLY KIT |
| 31454 |
|
REPL XS-16 HANDLE KIT |
| 31455 |
|
XS-16 COMPLETE HARDWARE KIT |
| 31456 |
|
HEAD PIN FOR 16K-S/16K |
| 31458 |
|
XS-16 CROSS MEMBER HDWE KIT |
| 31314 |
|
16K 5TH WHEEL UPRIGHTS BX/2 |
| 30001 |
|
TRI-BALL ADJ BALL MOUNT HUSKY |
| 31341 |
|
BALL MT CLS II 6-5/8X5/8X1-1/4 |
| 31342 |
|
BALL MT CLII 7-7/8X2-1/4X2-7/8 |
| 31349 |
|
BALL MOUNT TRIPLE BALL |
| 31354 |
|
BALL MT DOUBLE TOW BULK HUSKY |
| 31357 |
|
BALL MT CLS III 8X3/4X2 |
| 31358 |
|
BALL MT CLS III 10X3X4-1/4 |
Table 1 - Product Description
|
|
|
| Product No. |
|
Description |
| 20724 |
|
DBL ECON LITE,SOFT,OPT NO BULB |
| 51241 |
|
SGL LED EU-LTE,BWHT,OPT NO BLB |
| 51242 |
|
DBL LED EU-LTE,BWHT,OPT NO BLB |
| 51261 |
|
SGL LED EU-LT,BW/WHT,DIM NOBLB |
| 51262 |
|
SGL LED EU-LT,BW/OPT,DIM NOBLB |
| 51263 |
|
DBL LED EU-LT,BW/WHT,DIM NOBLB |
| 51264 |
|
DBL LED EU-LT,BW/OPT,DIM NOBLB |
| 17139 |
|
TRIANGULAR ADPT 30F-15M(13995) |
| 20405 |
|
1/2 X 25’ WATER HOSE (20150) |
| 20410 |
|
1/2 X 15’ WATER HOSE (27294) |
| 27294 |
|
AQUA PRO WATER LINE,1/2”X15’ |
| 27888 |
|
WTR FILL REC PLAST P/WHT CD/1 |
| 20150 |
|
AQUA PRO WATER LINE,1/2” X 25’ |
| 20151 |
|
AQUA PRO WATER LINE,1/2” X 50’ |
| 21317 |
|
AQUA PRO WATER LINE,5/8” X 25’ |
| 21318 |
|
AQUA PRO WATER LINE,5/8” X 50’ |
| 14059 |
|
ADAPTER 30F-15M CIRCULAR CD/1 |
| 14061 |
|
ADAPTER 15F-30M CIRCULAR CD/1 |
| 14063 |
|
ADAPTER 50F-15M CIRCULAR CD/1 |
| 65141 |
|
A/C HARD WIRE KIT TENT CAMPER |
| 10705 |
|
SCARE LIGHT W/CLR LENS BULK |
| 11587 |
|
LENS EURO LIGHT/FLEETWOOD |
| 11824 |
|
ECONOMY LIGHT OPTIC SGL CD/1 |
| 11825 |
|
ECONOMY LIGHT OPTIC DBL CD1 |
| 11826 |
|
LENS F/ECON OPTIC LIGHT |
| 13812 |
|
FLUORESCENT LIGHT 16W DLB TUBE |
| 13813 |
|
FLUORESCENT LIGHT 30W DLB TUBE |
| 14655 |
|
ECONOMY LIGHT WHT SGL CD/1 |
| 14656 |
|
ECONOMY LIGHT WHT DBL CD/1 |
| 14813 |
|
LENS F/ECONOMY LIGHT BULK |
| 16193 |
|
SCARE LIGHT W/CLR LENS CD/1 |
| 16747 |
|
BULB #JC10W HALOGEN CD/2 |
| 16748 |
|
FLUORESCENT TUBE F15T8/CW PK/2 |
| 16749 |
|
FLUORESCENT TUBE F8T5/CW PAK/2 |
| 17925 |
|
EURO LIGHT C/WHT-WHT SGL CD/1 |
| 17926 |
|
EURO LIGHT C/WHT-WHT DBL CD/1 |
| 18014 |
|
EURO LIGHT C/WHT-OPTIC SGL CD1 |
| 18015 |
|
EURO LIGHT C/WHT-OPTIC DBL CD1 |
| 18016 |
|
LENS F/EURO LITE WHITE CD/1 |
| 18017 |
|
LENS F/EURO LIGHT OPTIC CD/1 |
| 18102 |
|
PORCH LIGHT WHT-CLR CD/1 |
| 18104 |
|
PORCH LIGHT WHT-CLR-SW CD/1 |
| 18106 |
|
LENS F/PORCH LIGHT CLEAR |
| 18107 |
|
LENS F/PORCH LIGHT AMBER |
| 18109 |
|
PORCH LIGHT WHT-AMB CD/1 |
| 18111 |
|
PORCH LIGHT WHT-AMB-SW CD/1 |
| 18121 |
|
EURO LIGHT WHT-WHT SGL CD/1 |
|
|
|
| Product No. |
|
Description |
| 31359 |
|
BALL MT CLSIV 6-3/4X2X3-1/4 |
| 31360 |
|
BALL MT CLS III 9X1X2-1/4 |
| 31361 |
|
BALL MT CLS II 9”L 8”D |
| 31362 |
|
BALL MT CLS IV 10-1/2X1X2-1/4 |
| 31363 |
|
BALL MT CLS III 11-1/2X4-3/4X6 |
| 31364 |
|
BALL MT CLS IV STGHT 8X3/4X2 |
| 31366 |
|
BALL MT KIT 2IN BALL 2IN DROP |
| 31367 |
|
BALL MT KT 2IN BALL 3-1/4”DROP |
| 31369 |
|
BALL MT CLASS IV 12X1X2-1/4 |
| 31412 |
|
CUSTOM BRACKET KIT FORD |
| 31413 |
|
CLAMP-ON BRKT KIT DODGE ALL |
| 31415 |
|
CUSTOM BRACKET KIT CHEVY ALL |
| 31368 |
|
HUSKY GOOSENECK |
| 31196 |
|
HUSKY 10-16K GLIDER 3/BOX SET |
| 31745 |
|
KIT,SERV,H10-16K DS H&R ASSEM |
| 31748 |
|
KIT,SERV,H10-16K PS H&R ASSEM |
| 31751 |
|
KIT,SERV,H10-16K HNDL & HDWARE |
| 31752 |
|
KIT,SERV,H10-16K BOLT&WASH HWR |
| 31789 |
|
KIT,SERV,H10-16K GLIDING PAD |
| 31795 |
|
KIT,SERV,H10-16K COMP CYL ASSY |
| 31796 |
|
KIT,SERV,H10-16K PS FLIP ASSY |
| 31797 |
|
KIT,SERV,H10-16K CLEV/COT PIN |
| 31803 |
|
KIT,SERV,H10-16K PIV PLT ASSY |
| 31804 |
|
KIT,SERV,H10-16K RAIL SP &HDWR |
| 31805 |
|
KIT,SERV,H10-16K PIV RET SPR |
| 31806 |
|
KIT,SERV,H10-16K BUMP STOP HWR |
| 32042 |
|
HUSKY 10-26K GLIDER 3/BOX SET |
| 32043 |
|
SHIM KIT (THIN) |
| 32044 |
|
KIT, SERV, HUSKY 10 PULL HNDLE |
| 32045 |
|
KIT,3/8” HDWE KIT FOR H10 HNDL |
| 32046 |
|
KIT,SERV, HUSKY 10 GLIDING PAD |
| 32047 |
|
KIT,SERV,H10 COMP CYL ASSY |
| 32048 |
|
KIT,SERV,H10 HANDLE RET SPRING |
| 32049 |
|
KIT,SERV,H10 PS PIVOT ASSEMBLY |
| 32050 |
|
KIT,SERV,H10 CLEVIS/COTTER PIN |
| 32051 |
|
KIT,SERV,H10 PIVOT PLATE ASBLY |
| 32053 |
|
KIT,SERV,H10 HOUSING HDWR 1/2” |
| 32054 |
|
KIT,H10 END TUBE PLUGS BAG/2 |
| 32056 |
|
KIT,SERV,H10 PIVOT RET SPRING |
| 32058 |
|
PIVOT PLATE HARDWARE SERV KIT |
| 32059 |
|
KIT, SERVICE, CENTER BOLT |
| 30003 |
|
BASE RAIL CLEVIS PIN, BAG/4 |
| 30004 |
|
BASE RAIL 5/8 HAIR PIN BAG/4 |
| 30562 |
|
10 BOLT KIT DGE 1500 02-08 |
| 30575 |
|
10 BOLT DGE TUBE SPACER KIT |
| 30582 |
|
10 BOLT KIT DGE 2500/3500 |
| 30597 |
|
10 BOLT TUBE SPACER KIT TUNDRA |
2
Table 1 - Product Description
|
|
|
| Product No. |
|
Description |
| 18122 |
|
EURO LIGHT WHT-OPTIC SGL CD/1 |
| 18123 |
|
EURO LIGHT WHT-WHT DOUBLE CD/1 |
| 18124 |
|
EURO LIGHT WHT-OPTIC DBL CD/1 |
| 18530 |
|
LENS F/ECONOMY LIGHT CD/1 |
| 51251 |
|
PORCH LIGHT WHT,CLR,WO/SW CD/1 |
| 51252 |
|
PORCH LIGHT WHT,CLR,W/SW CD/1 |
| 51299 |
|
LENS FOR NEW PORCH LIGHT CD/1 |
| 11533 |
|
EXTENSION CORD 30A 25FT W/HAND |
| 11534 |
|
EXTENSION CORD 30A 50FT W/HAND |
| 11535 |
|
EXTENSION CORD 50A 30FT W/HAND |
| 11827 |
|
ARCON GENERATOR ADPT L5-30 |
| 11828 |
|
ARCON GENERATOR ADPT L5-30 |
| 13218 |
|
ADAPTER 30A-15A ROUND CSA CD/1 |
| 13333 |
|
ADAPTER 30A-15A ROUND CSA BULK |
| 13993 |
|
ADAPTER 30A-15A TRI CSA CD/1 |
| 13995 |
|
ADAPTER 30A-15A TRI CSA BULK |
| 14014 |
|
ROUND ADAPTER 50F-30M |
| 14018 |
|
ROUND ADAPTER 30F-50M |
| 14053 |
|
ADAPTER 15F-30M TRIANGULR CD/1 |
| 14054 |
|
ADAPTER 15F-30M TRIANGULR BULK |
| 14057 |
|
ADAPTER 15F-30M DLX ROUND CD/1 |
| 14058 |
|
ADAPTER 15F-30M DLX ROUND BULK |
| 14081 |
|
ADAPTER 30F-15M 90 DEG PK/1 |
| 14082 |
|
ADAPTER 30F-15M 90 DEG BULK |
| 14237 |
|
PIGTAIL 30F-STRIPPED 18IN |
| 14238 |
|
PIGTAIL 30M-STRIPPED 18IN |
| 14239 |
|
PIGTAIL 15F-30M 18IN |
| 14240 |
|
PIGTAIL 30F-15M 18IN |
| 14241 |
|
PIGTAIL 30F-50M 18IN |
| 14242 |
|
PIGTAIL 50F-30M 18IN |
| 14243 |
|
PIGTAIL 30F-50M FLAT WIRE 18IN |
| 14244 |
|
PIGTAIL 50F-30M FLAT WIRE 18IN |
| 14245 |
|
PIGTAIL 30F-15M 9IN PK/1 |
| 14246 |
|
PIGTAIL 30F-15M FLATWIRE 12IN |
| 14247 |
|
POWER CORD 30M-STRIPPED 25FT |
| 14248 |
|
EXTENSION CORD 30A 25FT |
| 14249 |
|
EXTENSION CORD 30A 50FT |
| 14250 |
|
POWER CORD 50A-STRIPPED 25FT |
| 14362 |
|
PIGTAIL 15F-30M 18IN PK/1 |
| 14363 |
|
PIGTAIL 30F-STRIPPED 18IN PK/1 |
| 14365 |
|
PIGTAIL 30F-15M 18IN CD/1 |
| 14366 |
|
PIGTAIL 30F-15M FW 12IN PK/1 |
| 14367 |
|
PIGTAIL 30F-50M 18IN PK/1 |
| 14368 |
|
PIGTAIL 30F-50M FW 18IN PK/1 |
| 14369 |
|
PIGTAIL 30M-STRIPPED 18IN PK/1 |
| 14370 |
|
PIGTAIL 30F-15M 9IN |
| 14371 |
|
PIGTAIL 50F-30M 18IN PK/1 |
|
|
|
| Product No. |
|
Description |
| 30600 |
|
10 BOLT TUBE SPACER KIT TUNDRA |
| 30607 |
|
4 BOLTKITFORD |
| 30619 |
|
4 & 10 BOLTKITFORD |
| 30640 |
|
4 BOLTRAILADAPTERKIT |
| 30665 |
|
4 BOLTRAILADAPTERKITDGE |
| 31385 |
|
STRAIGHT“L” BRKT SERVICE KIT |
| 31401 |
|
ANGLE BRACKET REPLACEMENT KIT |
| 31417 |
|
WHEEL BOLT KIT PKG/8 |
| 31418 |
|
HARDWARE SERVICE KIT |
| 31563 |
|
UNIVERSAL 4-BOLT INSTALL KIT |
| 31622 |
|
10 BOLT RAIL INSTALL KIT |
| 31712 |
|
7/8” SPACER BLOCK KIT BAG/4 |
| 31728 |
|
PULL HANDLE & PIN SERV KIT |
| 31419 |
|
BASE RAIL SPACER KIT |
| 80179 |
|
REPLACEMENT BOARD AND FOBS |
| 81489 |
|
MOTOR, SP2500 AND SP3000 JACK |
| 81490 |
|
MOTOR, SP3500 JACK |
| 81492 |
|
SP 2500 UPPER JACK ASSEMBLY |
| 81493 |
|
SP 3000 UPPER JACK ASSEMBLY |
| 81494 |
|
SP 3500 UPPER JACK ASSEMBLY |
| 81495 |
|
SP 3000 LOWER JACK ASSEMBLY |
| 81496 |
|
SP 3500/2500 LOWER JACK ASMBLY |
| 81497 |
|
UNIV CONNECTOR STORAGE KIT |
| 81915 |
|
SP 2500 UPPER COVER KIT |
| 81916 |
|
SP 3000 UPPER COVER KIT |
| 81917 |
|
SP 3500 UPPER COVER KIT |
| 82019 |
|
BALL SCREW WITH NUT ONLY |
| 82020 |
|
ACME SCREW WITH NUT ONLY |
| 82031 |
|
OPERATING SWITCH HSB |
| 82032 |
|
LIGHT SWITCH HSB |
| 82033 |
|
GASKETS |
| 82045 |
|
SET OF PLASTIC COVERS |
| 82046 |
|
KIT, RUBBER COVERS, GASK, GROM |
| 82066 |
|
HSB5000 OPERATING SWITCH |
| 82067 |
|
HSB5000 LIGHT SWITCH |
| 87450 |
|
HB3000 UPPER JACK ASSEMBLY |
| 87451 |
|
HB4500 UPPER JACK ASSEMBLY |
| 87452 |
|
OPERATING SWITCH HB3000,HB4500 |
| 87453 |
|
LIGHT SWITCH HB3000,HB4500 |
| 87454 |
|
SWITCH BOOTS-2PK HB3000,HB4500 |
| 87455 |
|
LED WORK LIGHTS W/ RUB SEALS |
| 87456 |
|
BRAKE/CRANK COVERS W/RUB SEALS |
| 87457 |
|
MOTOR HB3000 AND HB4500 |
| 87458 |
|
BRAKE FOR HB3000 AND HB4500 |
| 87459 |
|
HB3000 LOWER JACK ASSEMBLY |
| 87460 |
|
HB4500 LOWER JACK ASSEMBLY |
| 87461 |
|
ADJUSTABLE LEG W/FOOT PAD |
3
Table 1 - Product Description
|
|
|
| Product No. |
|
Description |
| 14372 |
|
PIGTAIL 50F-30M FW 18IN PK/1 |
| 14398 |
|
GENERATOR ADAPTER,ROUND 30AMP |
| 14977 |
|
GENERATOR PIGTAIL ADPT,30AMP |
| 17341 |
|
ARCON MULTI-MAX ADAPTER |
| 17360 |
|
GENERATOR CORD TRI-SOURCE ADPT |
| 17361 |
|
GENERATOR ADPTR-L5-30P/2X5-20R |
| 17362 |
|
GENERATOR ADPTR-L14-30P/2X5-20R |
| 18203 |
|
30AMP REPLACEMENT PLUG CD/1 |
| 18206 |
|
30AMP REPL RECEPTACLE CD/1 |
| 19186 |
|
50A MALE CORD END |
| 19194 |
|
50A FEMALE CORD END |
| 20667 |
|
SGL LED EC-LITE,BWHT,OPT LENS |
| 20668 |
|
DBL LED EC-LITE,BWHT,OPT LENS |
| 20669 |
|
SGL LED EU-LITE,BWHT,OPT LENS |
| 20670 |
|
DBL LED EU-LITE,BWHT,OPT LENS |
| 20671 |
|
LED SCARE LIGHT,BWHT,CLR LENS |
| 20672 |
|
LED PORCH LIGHT,BWHT,CLR LENS |
| 20673 |
|
LED PRCH LITE W/SW,BWHT,C-LENS |
| 20711 |
|
SGL LED EU-LITE,SWHT,OPT LENS |
| 20712 |
|
DBL LED EU-LITE,SWHT,OPT LENS |
| 20713 |
|
SGL LED EU-LITE,SWHT,WHT LENS |
| 20714 |
|
DBL LED EU-LITE,SWHT,WHT LENS |
| 20715 |
|
SGL LED EC-LITE,SWHT,OPT LENS |
| 20716 |
|
DBL LED EC-LITE,SWHT,OPT LENS |
| 20725 |
|
SGL LED EU-LITE,BWHT,WHT LENS |
| 20726 |
|
DBL LED EU-LITE,BWHT,WHT LENS |
| 51265 |
|
SGL LED EU-LT,BW/WHT LENS,DIMM |
| 51266 |
|
SGL LED EU-LT,BW/OPT LENS,DIMM |
| 51267 |
|
DBL LED EU-LT,BW/WHT LENS,DIMM |
| 51268 |
|
DBL LED EU-LT,BW/OPT LENS,DIMM |
| 81264 |
|
PULL DOWN WAND |
| 48731 |
|
SURFACE MOUNT BASE |
| 48732 |
|
RECESSED BASE-ROUND |
| 48733 |
|
RECESSED BASE-SQUARE |
| 65264 |
|
STEP STABILIZER |
| 51221 |
|
SGL LED EU-LITE,BWHT,OPT LENS |
| 51222 |
|
DBL LED EU-LITE,BWHT,OPT LENS |
| 51225 |
|
FLUORESCENT TUBE F15T8/CW PK/2 |
| 51226 |
|
PORCH LIGHT WHT-CLR-SW CD/1 |
| 51227 |
|
FLUORESCENT TUBE F8T5/CW PAK/2 |
| 51228 |
|
LENS F/PORCH LIGHT AMBER |
| 51229 |
|
PORCH LIGHT WHT-CLR CD/1 |
| 51230 |
|
LENS F/PORCH LIGHT CLEAR |
| 51231 |
|
LENS F/EURO LITE WHITE CD/1 |
| 51232 |
|
EURO LIGHT WHT-OPTIC DBL CD/1 |
| 51233 |
|
EURO LIGHT WHT-OPTIC SGL CD/1 |
| 51234 |
|
EURO LIGHT WHT-WHT DOUBLE CD/1 |
| 51235 |
|
EURO LIGHT WHT-WHT SGL CD/1 |
|
|
|
| Product No. |
|
Description |
| 87462 |
|
BRAKE RELEASE HAND & MAN CRANK |
| 87490 |
|
HB3000-2 LOWER JACK ASSEMBLY |
| 87491 |
|
FOOT PAD F/2” 3000# |
| 87526 |
|
MANUAL RESET CIRCUIT BREAKER |
| 87637 |
|
HB3000 SMARTSTOP UPPER JACK AS |
| 87638 |
|
HB4500 SMARTSTOP UPPER JACK AS |
| 87639 |
|
BRK.RELS.HAND&MAN.CRNK.SMRTSTP |
| 87640 |
|
CONNECTOR STORAGE KIT |
| 87642 |
|
UPPER PLSTC.CVR.KIT F/HB4500 |
| 87643 |
|
UPPER PLSTC.CVR.KIT F/HB3000 |
| 87644 |
|
UPPER PLSTC.CVR.KIT F/HB3000/2 |
| 87645 |
|
LOWER PLSTC.CVR.KIT |
| 87658 |
|
HB4500 REMOTE UPPER JACK ASSY |
| 82022 |
|
ELEC JACK SUPER BRUTE 5K W/REM |
| 82084 |
|
ELEC JACK SUPER BRUTE 4K |
| 87247 |
|
ELECTRIC JACK-BRUTE HB4500 |
| 87248 |
|
ELECTRIC JACK-BRUTE HB3000 |
| 87641 |
|
ELEC JACK-BRUTE W/REMOTE |
| 81079 |
|
SLIDE-OUT STABIL 17”-29” PAIR |
| 81080 |
|
SLIDE-OUT STABIL 21”-38” PAIR |
| 81081 |
|
SLIDE-OUT STABIL 27”-49” PAIR |
| 31974 |
|
1000# SIDE WIND JACK CAP |
| 31975 |
|
2000# SIDE WIND JACK CAP |
| 70135 |
|
SCISSORS JACKS - 28IN, BX/2 |
| 72138 |
|
RPL SCISSOR JACK-20” |
| 72139 |
|
RPL SCISSOR JACK-24” |
| 72140 |
|
RPL SCISSOR JACK-28” |
| 75203 |
|
5TH WHEEL STABILIZER ADJ |
| 76850 |
|
SPEED HANDLE |
| 76862 |
|
SCISSORS JACKS -24IN, BX/2 |
| 76942 |
|
5TH WHEEL STABILIZER |
| 77713 |
|
SCISSORS JACKS -20IN, BX/2 |
| 87070 |
|
COUPLER 1-7/8”BALL 2”W W/CHAIN |
| 87071 |
|
COUPLER 1-7/8”BALL 2.5”W W/CHN |
| 87072 |
|
COUPLER 1-7/8”BALL 3”W W/CHAIN |
| 87073 |
|
COUPLER 2”BALL 2”W W/CHAIN |
| 87074 |
|
COUPLER 2”BALL 2.5”W W/CHAIN |
| 87075 |
|
COUPLER 2”BALL 3”W W/CHN 3500# |
| 87076 |
|
COUPLER 2”BALL 3”W W/CHN 6000# |
| 87077 |
|
COUPLER 2” A-FRAME W/CHAIN |
| 87079 |
|
COUPLER 2” A-FRAME, FLAT LOCK |
| 87080 |
|
COUPLER 2 5/16” A-FRAME, 10K# |
| 87081 |
|
COUPLER 2 5/16” A-FRAME, 14K# |
| 87082 |
|
COUPLER REPAIR KIT 1-7/8” |
| 87083 |
|
COUPLER REPAIR KIT 2”, 3500# |
| 87084 |
|
COUPLER REPAIR KIT 2”, 5000# |
| 34842 |
|
TONGUE BALL PLATE |
| 34845 |
|
BALL MOUNT BAR |
4
Table 1 - Product Description
|
|
|
| Product No. |
|
Description |
| 51236 |
|
LENS F/EURO LIGHT OPTIC CD/1 |
| 51237 |
|
PORCH LIGHT WHT-AMB CD/1 |
| 51238 |
|
PORCH LIGHT WHT-AMB-SW CD/1 |
| 70406 |
|
BUMPER PLUG 4IN BULK |
| 79403 |
|
BUMPER PLUG 4IN CD/2 |
| 48829 |
|
FAULKNER MAT CARRY BAG |
| 44021 |
|
SERVING TRAY F/DIR.CHAIR BLACK |
| 48945 |
|
SERVING TRAY,NEW BRACKET, BLK |
| 43951 |
|
CHAIR BAG BLACK |
| 48529 |
|
LACING FOR RECLINER WHITE |
| 48531 |
|
LACING FOR RECLINER BLACK |
| 48532 |
|
LACING FOR RECLINER GREEN |
| 48960 |
|
RECL,BEACH SAND MESH WOODEN AR |
| 48961 |
|
RECL, MOCHA WOODEN ARM |
| 48962 |
|
RECL,BLACK MESH |
| 48963 |
|
RECL,PADDED BLACK |
| 48964 |
|
RECL,PADDED BLUE |
| 48965 |
|
RECL,PADDED GREEN |
| 48966 |
|
RECL,PADDED GREEN/BLACK |
| 48967 |
|
RECL,PADDED RED/BLACK |
| 48968 |
|
RECL,PADDED BLUE/BLACK |
| 48969 |
|
RECL,PADDED CHECKERED |
| 48970 |
|
RECL,BEACH SAND MESH XL |
| 48971 |
|
RECL, MOCHA WOODEN ARM XL |
| 48972 |
|
RECL,BLACK MESH XL |
| 48973 |
|
RECL,PADDED BLACK XL |
| 48974 |
|
RECL,PADDED BLUE XL |
| 48975 |
|
RECL,PADDED GREEN XL |
| 48976 |
|
RECL,PADDED GREEN/BLACK XL |
| 48977 |
|
RECL,PADDED RED/BLACK XL |
| 48978 |
|
RECL,PADDED BLUE/BLACK XL |
| 48979 |
|
RECL,PADDED CHECKERED XL |
| 45637 |
|
MAT,SUMMER WAVES 8X16 GRN/BLUE |
| 45638 |
|
MAT,SUMMER WAVES 8X16 TAN GOLD |
| 46258 |
|
MAT,SUMMER WAVES 8X16 BLACK |
| 46294 |
|
MAT,SUMMER WAVES 8X20 GRN/BLUE |
| 46322 |
|
MAT,SUMMER WAVES 8X20 TAN GOLD |
| 46341 |
|
MAT,SUMMER WAVES 8X20 BLACK |
| 46354 |
|
MAT, MIRAGE 8X16 SILVER GOLD |
| 46361 |
|
MAT, MIRAGE 8X16 BURGUNDY |
| 46362 |
|
MAT, MIRAGE 8X20 SILVER GOLD |
| 46363 |
|
MAT, MIRAGE 8X20 BURGUNDY |
| 46502 |
|
MAT, INDEPENDENCE DAY 8X20 |
| 46503 |
|
MAT, INDEPENDENCE DAY 9X12 |
| 46504 |
|
MAT, WILD MUSTANG 9X12 BLK/SIL |
| 46506 |
|
MAT, WILD MUSTANG 9X12 BLUE |
| 46507 |
|
MAT, WILD MUSTANG 9X12 BROWN |
| 46508 |
|
MAT,WILD MUSTANG 9X12 BURGANDY |
| 46945 |
|
MAT, WILD MUSTANG 9X12 GREEN |
| 48430 |
|
MAT, MONTE CARLO 6X9 BEIGE |
| 48448 |
|
MAT, MONTE CARLO 6X9 BLUE |
|
|
|
| Product No. |
|
Description |
| 34846 |
|
SLIDE BAR |
| 34847 |
|
HANDLE F/HUSKY SWAY CONTROL |
| 34853 |
|
SPRING CLIP F/SW CONTROL 2/PK |
| 71195 |
|
REPL SCREW KIT PK/8 |
| 10304 |
|
PREWIRE 6WAY ZINC 12IN CD/1 |
| 10305 |
|
PREWIRE 7WAY PLAST 12IN CD/1 |
| 10547 |
|
PREWIRE 7WAY PLASTIC 48IN |
| 11588 |
|
EXTENSION HARNESS,5WAY 2FT |
| 11952 |
|
BRACKET 4/5/6-WAY BLK CD/1 |
| 13215 |
|
PREWIRE 7WAY BLADE 12IN,BULK |
| 13216 |
|
PREWIRED 7WAY BLADE 60IN,BULK |
| 13217 |
|
PREWIRED 7WAY BLADE 96IN,BULK |
| 13220 |
|
TOWING CABLE COILED 4-WAY CD/1 |
| 13221 |
|
TOWING CABLE COILED 6-WAY CD/1 |
| 13226 |
|
CONNECTOR BRKT UNIV 7PIN CD/1 |
| 13227 |
|
CONNECTOR BRKT UNIV 7PIN BULK |
| 13795 |
|
CONNECT 7WAY PREM CAR END BULK |
| 13796 |
|
CONNECT 7WAY PREM CAR END CD/1 |
| 14621 |
|
CONNECTOR 4WAY ZINC CAR END |
| 14622 |
|
CONNECTOR 4WAY ZINC TRL END |
| 14623 |
|
CONNECT 4WAY ZINC CAR END CD/1 |
| 14624 |
|
CONNECT 4WAY ZINC TRL END CD/1 |
| 14626 |
|
CONNECTOR 6WAY ZINC CAR END |
| 14627 |
|
CONNECTOR 6WAY ZINC TRL END |
| 14628 |
|
CONNECT 6WAY ZINC CAR END CD/1 |
| 14629 |
|
CONNECT 6WAY ZINC TRL END CD/1 |
| 14630 |
|
BRACKET 4,5,6WAY ZINC CD/1 |
| 14631 |
|
CONNECTOR 7WAY METAL CAR END |
| 14632 |
|
CONNECTOR 7WAY METAL TRL END |
| 14633 |
|
CONNECT 7WAY MET CAR END CD/1 |
| 14634 |
|
CONNECT 7WAY MET TRL END CD/1 |
| 14636 |
|
CONNECTOR 7WAY PLAST CAR END |
| 14794 |
|
BRACKET 4,5,6WAY ZINC BULK |
| 14797 |
|
CONNECTOR 6WAY PLAST TRL END |
| 14798 |
|
CONNECTOR 6WAY PLAST CAR END |
| 14800 |
|
CONNECTOR 4WAY CHR TRL END |
| 14801 |
|
CONNECTOR 4WAY CHR CAR END |
| 14805 |
|
BRACKET 7WAY ZINC BULK |
| 14808 |
|
BRACKET 7&9WAY ZINC BULK |
| 15417 |
|
CONNECTOR 4WAY CHROME CD/1 |
| 15418 |
|
CONNECT 4WAY CHR CAR END CD/1 |
| 15419 |
|
CONNECT 4WAY CHR TRL END CD/1 |
| 18046 |
|
BRACKET 4,5,6WAY BLACK CD/1 |
| 18047 |
|
BRACKET 7&9WAY BLACK CD/1 |
| 18048 |
|
BRACKET 4,5,6WAY BLACK BULK |
| 18049 |
|
BRACKET 7&9WAY BLACK BULK |
| 18298 |
|
PREWIRE 6WAY ZINC 12IN |
| 18299 |
|
PREWIRE 7WAY PLASTIC 12IN |
| 30100 |
|
BALL COVER,1-7/8-2 BLK |
| 31279 |
|
BALL COVER,1-7/8-2 RED |
| 11859 |
|
HARDWARE KIT 6WAY |
5
Table 1 - Product Description
|
|
|
| Product No. |
|
Description |
| 48449 |
|
MAT, MONTE CARLO 6X9 GREEN |
| 48450 |
|
MAT, MONTE CARLO 9X12 BEIGE |
| 48451 |
|
MAT, MONTE CARLO 9X12 BLUE |
| 48453 |
|
MAT, MONTE CARLO 9X12 GREEN |
| 48464 |
|
MAT, MONTE CARLO 8X20 BEIGE |
| 48465 |
|
MAT, MONTE CARLO 8X20 BLUE |
| 48486 |
|
MAT, MONTE CARLO 8X20 GREEN |
| 48695 |
|
MAT, VINEYARD 6X9 BEIGE |
| 48698 |
|
MAT, VINEYARD 6X9 BLUE |
| 48699 |
|
MAT, VINEYARD 6X9 GREEN |
| 48700 |
|
MAT, VINEYARD 9X12 BEIGE |
| 48701 |
|
MAT, VINEYARD 9X12 BLUE |
| 48702 |
|
MAT, VINEYARD 9X12 GREEN |
| 48703 |
|
MAT, VINEYARD 8X20 BEIGE |
| 48704 |
|
MAT, VINEYARD 8X20 BLUE |
| 48705 |
|
MAT, VINEYARD 8X20 GREEN |
| 48707 |
|
MAT, FINISH LINE 6X9 |
| 48708 |
|
MAT, FINISH LINE 9X12 |
| 48709 |
|
MAT, FINISH LINE 8X20 |
| 48823 |
|
WORK&PLAY MAT,FINISH LINE36X68 |
| 48824 |
|
WORK&PLAY MAT,BEIGE,VNYD36X68 |
| 31574 |
|
PIVOT PIN KIT FOR 16KW & 26KW |
| 31575 |
|
CROSS BEAM HDWE KIT F 16&26KW |
| 31576 |
|
BASE RAIL HDWE KIT F 16&26KW |
| 31577 |
|
CROSS MEMBER KIT FOR 26KW |
| 31839 |
|
26K W HARDWARE KIT |
| 31580 |
|
CROSS BEAM KIT FOR 16KW |
| 31390 |
|
CENTER-LINE HEAD 500#-1400# |
| 31393 |
|
CENTER-LINE SPRING BAR BRKT RH |
| 31394 |
|
CENTER-LINE SPRING BAR BRKT LH |
| 31447 |
|
KIT CENTER-LINE COMPLETE HDWE |
| 31448 |
|
KIT CENTER-LINE DS TRUNNION |
| 31449 |
|
KIT CENTER-LINE PS TRUNNION |
| 31450 |
|
KIT CENTER-LINE PRESSURE PLATE |
| 31459 |
|
CENTER-LINE CUSTOMER SHIM KIT |
| 31552 |
|
CENTER LINE FORGED SHANK |
| 31573 |
|
HANDLE KIT FOR 16KW & 26KW |
| 31578 |
|
HEAD AND YOKE KIT FOR 26KW |
| 31579 |
|
HANDLE GRIP KIT FOR 16&26KW |
| 31581 |
|
HEAD AND YOKE KIT FOR 16KW |
| 31672 |
|
L-BRACKET CHAIN AND PIN KIT |
| 31703 |
|
CROSSMEMBER RUBBER BUMPER KIT |
| 31705 |
|
C/L HEAD ONLY SERVICE KIT |
| 31878 |
|
CENTER-LINE LIFT TOOL KIT |
| 32017 |
|
C/L SPRING BAR STRAP KIT |
| 31527 |
|
SPRING BAR RETAINER PACK |
| 37153 |
|
SET SCREW 5/8IN |
| 31511 |
|
DRAW BAR CENTER-LINE 500-800# |
| 31512 |
|
DRAW BAR CENTER-LINE 801-1200# |
| 31513 |
|
DRAW BAR CENTER-LINE1001-1400# |
| 34714 |
|
WHEEL CHOCK |
|
|
|
| Product No. |
|
Description |
| 11860 |
|
HARDWARE KIT 7&9 WAY |
| 32256 |
|
5TH WHEEL LUBE DISC 12” 6.25MM |
| 33862 |
|
5TH WHEEL LUBE DISC 8INCH |
| 34818 |
|
HITCH LOCK 5/8” |
| 34819 |
|
HITCH LOCK 1/2” |
| 34914 |
|
5TH WHL LUBE DISC HD 10INCH |
| 38443 |
|
REC COVER 2IN PRESS-IN |
| 38444 |
|
REC COVER 1-1/4IN PRESS-IN |
| 38445 |
|
REC COVER,CHR 2”BULK |
| 38446 |
|
REC COVER,BLK 2”BULK |
| 38790 |
|
5TH WHEEL LOCK |
| 38958 |
|
COUPLER LOCK CD/1 |
| 17929 |
|
MAG TOWING LIGHTS HUSKY |
| 39585 |
|
SWAY CONTROL BALL MT ADAPTER |
| 70564 |
|
STABILIZER JACK,ADJ SET/2 |
| 19356 |
|
TRAILER END CONNECTOR KIT 8’ |
| 19430 |
|
TRAILER END CONNECTOR KIT 12’ |
| 13034 |
|
BATTERY BOX GRP 24 BLACK |
| 13035 |
|
BATTERY BOX GRP 27 BLACK |
| 13228 |
|
BATTERY BOX GRP GC-2 BLACK |
| 19216 |
|
BATTERY CHARGER 12V 2A |
| 19674 |
|
PH TC2-P 12V/2A CHARGER |
| 80205 |
|
POWERHOUSE GENERATOR COVER M1 |
| 80206 |
|
POWERHOUSE GENERATOR COVER LG |
| 80208 |
|
POWERHOUSE GENERATOR COVER S |
| 80443 |
|
GENERATOR COVER - S(500WI) |
| 80445 |
|
GENERATOR COVER - M1(1000WI) |
| 80446 |
|
GEN COVER- LG 2000WI&PH2100PRI |
| 80457 |
|
GENERATOR COVER - XL(PH3100RI) |
| 80505 |
|
GENERATOR COVER, PH6500RI |
| 11796 |
|
BATT STRAP 54IN W/BRKTS |
| 12024 |
|
BATT STRAP,42IN W/BRKTS |
| 60370 |
|
GENERATOR-500WI INVERTER |
| 60376 |
|
GENERATOR-2000WI INVERTER |
| 61356 |
|
GENERATOR-1000WI INVERTER |
| 63650 |
|
GENERATOR-3600W OPEN FRAME |
| 64211 |
|
GENERATOR-4000W INV EFI W/LCD |
| 64229 |
|
GENERATOR-PH6500RI-NEW |
| 69271 |
|
GENERATOR-2100W INVERTER P&R |
| 69272 |
|
GENERATOR-2700W INVERTER P&R |
| 69273 |
|
GENERATOR-3100W INVERTER R |
| 69274 |
|
GENERATOR-PH6500RI |
| 69276 |
|
2100/2700 GENSET PARALLEL KIT |
| 81199 |
|
2500LB POWER JACK, ACME SCREW |
| 81200 |
|
3000LB POWER JACK, ACME SCREW |
| 81201 |
|
3500LB POWER JACK, ACME SCREW |
| 25606 |
|
TOTE-N-STOR 11GAL |
| 25951 |
|
TOTE-N-STOR 6GAL |
| 25607 |
|
TOTE-N-STOR 15GAL |
| 25608 |
|
TOTE-N-STOR 25GAL |
| 25609 |
|
TOTE-N-STOR 32GAL |
6
Table 1 - Product Description
|
|
|
| Product No. |
|
Description |
| 33253 |
|
HITCH PIN, 1/2” BULK |
| 33790 |
|
HITCH PIN/CLIP 5/8” CD/1 |
| 33791 |
|
HITCH PIN, 5/8” BULK |
| 33792 |
|
SPRING CLIP,BULK 5/8” |
| 34521 |
|
HITCH PIN/CLIP,1/2” CD/1 |
| 31395 |
|
CUSTOM BRACKET KIT-TITAN |
| 31396 |
|
CUSTOM BRACKET KIT CHEVY 1500 |
| 31397 |
|
CUSTOM BRACKET KIT CHEVY ALL |
| 31402 |
|
CUSTOM BRACKET KIT CHEVY ALL |
| 31404 |
|
CUSTOM BRACKET KIT DODGE ALL |
| 31405 |
|
CUSTOM BRACKET KIT FORD |
| 31406 |
|
CUSTOM BRACKET KIT FORD |
| 31407 |
|
CUSTOM BRACKET KIT FORD |
| 31408 |
|
CUSTOM BRACKET KIT FORD |
| 31409 |
|
CUSTOM BRACKET KIT FORD F150 |
| 31410 |
|
CUSTOM BRACKET KIT TUNDRA |
| 31414 |
|
CUSTOM BRACKET KIT USE W/31404 |
| 31564 |
|
CUSTOM BRKT KIT FORD F150 |
| 31565 |
|
CUSTOM BRKT KIT DODGE ALL |
| 31566 |
|
CUSTOM BRKT KIT DODGE 2009 |
| 31852 |
|
CUSTOM BRACKET KIT GMC/CHEVY |
| 31853 |
|
“L” BRACKET KIT GMC/CHEVY |
| 32084 |
|
2013 DODGE 2500 4BOLT INST KIT |
| 32221 |
|
CTM BRKT KIT 2013/14 DODGE RAM |
| 32222 |
|
KIT, SERVICE, 1/2” U-BOLT |
| 32223 |
|
KIT, HRDWRE, 2013/14 DODGE RAM |
| 32224 |
|
KIT, SPACER, 2013/14 DODGE RAM |
| 30255 |
|
BALL 2-5/16X1-1/4X2-5/8 PAK/1 |
| 30508 |
|
TOW BAR, ADJ 5000# HUSKY |
| 30601 |
|
BALL 2 X 1 X 1 |
| 30605 |
|
BALL 2-5/16X1-1/4X2 |
| 30678 |
|
BALL 2-5/16X1-1/4X2-5/8 CHROME |
|
|
|
| Product No. |
|
Description |
| 20122 |
|
TOTE-N-STOR 18GAL 4-WHEEL |
| 20123 |
|
TOTE-N-STOR 25GAL 4-WHEEL |
| 20129 |
|
TOTE-N-STOR 38GAL 4-WHEEL |
| 25644 |
|
TOW BRKT F/TOTE-N-STOR |
| 65213 |
|
RUBBER ROOF KIT, BULK |
| 61255 |
|
VENT LID VNTLN/ELXR WHT BOX/1 |
| 61628 |
|
VENT LID JENSEN WHITE BOX/1 |
| 61634 |
|
VENT LID OLD ELIXIR WHT BOX/1 |
| 62712 |
|
REFER VENT LID-BLK, N/S DOM |
| 62718 |
|
REFER VENT LID-BLK, NORCOLD |
| 63110 |
|
VENT LID JENSEN WHITE BAG/1 |
| 63112 |
|
VENT LID JENSEN SMOKE BAG/1 |
| 63113 |
|
VENT LID VNTLN/ELXR WHT BAG/1 |
| 63115 |
|
VENT LID VNTLN/ELXR SMK BAG/1 |
| 63116 |
|
VENT LID OLD ELIXIR WHT BAG/1 |
| 63118 |
|
VENT LID OLD ELIXIR SMK BAG/1 |
| 65479 |
|
VENT LID,VNTLN,WHT,LFTIME BX/1 |
| 65483 |
|
FAN BLADE 6IN ROUND BORE CCW |
| 65484 |
|
FAN BLADE 6IN D BORE CW |
| 65485 |
|
FAN BLADE 6IN D BORE CCW |
| 65491 |
|
FAN BLADE 6IN RND BORE CCW |
| 65528 |
|
REFER VENT LID-PW,N/S DOMETIC |
| 65529 |
|
REFER VENT LID-PW,O/S DOMETIC |
| 65532 |
|
REFER VENT LID-P/W,NORCOLD |
| 69278 |
|
VENT LID VNTLN/ELXR WHITE BG/1 |
| 69279 |
|
VENT LID VNTLN/ELXR SMOKE BG/1 |
| 69280 |
|
VENT LID VNTLN/ELXR WHITE BX/1 |
| 69282 |
|
VENT LID NEW JENSEN95+WHT BG/1 |
| 69283 |
|
VENT LID NEW JENSEN95+SMK BG/1 |
| 69284 |
|
VENT LID NEW JENSEN95+WHT BX/1 |
| 67304 |
|
VENT CUSHION WITH PULL STRAP |
|
|
|
7