Exhibit 1.01

The Coast Distribution System, Inc.

Conflict Minerals Report

This Conflict Minerals Report (“CMR” or the “Report”) of The Coast Distribution System, Inc., a Delaware corporation (the “Company,” “we,” “us” or “our”) has been prepared and filed pursuant to Rule 13p-1 promulgated under the Securities Exchange Act of 1934, as amended (“Rule 13p-1” or the “Rule”), for the reporting period from January 1, 2014 to December 31, 2014. Numerous terms in this Report are defined in Rule 13p-1 and the Form SD; reference is made to those sources and to the 1934 Act Release No. 34-677176 (August 22, 2012) for such definitions.

Introduction

In August 2012, pursuant to Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act, the Securities and Exchange Commission (“SEC”) adopted a new Form SD and Rule 13p-1 to implement reporting and disclosure requirements concerning conflict minerals. The Rule imposes certain reporting obligations on SEC registrants who manufacture or contract to manufacture products where conflict minerals (regardless of origin) are necessary to the functionality or production of the product. For the purposes of this assessment, conflict minerals are currently defined to include cassiterite, columbite-tantalite, gold, wolframite, and their derivatives, which are limited to tin, tantalum, tungsten, and gold.

SEC registrants whose conflict minerals originated from sources other than the Democratic Republic of the Congo or an adjoining country (collectively, the “Covered Countries”), or whose conflict minerals originate from recycled and scrap sources must only submit a Form SD. The Form SD describes the results of the registrant’s Reasonable Country of Origin Inquiry (“RCOI”). SEC registrants that have reason to believe that any of the conflict minerals in its supply chain originated in the Covered Countries, or registrants that are unable to determine the country of origin of those conflict minerals, must exercise due diligence on the conflict minerals’ source and chain of custody. The results and a description of the due diligence must be submitted annually to the SEC in a CMR filed as an exhibit to the Form SD.

After a thorough RCOI, we were not able to determine the country of origin of all conflict minerals in our supply chain, and as a result we are submitting this CMR pursuant to Rule 13p-1. The Report presented herein is not audited pursuant to the Rule’s accommodation for the 2013 and 2014 reporting periods.

Conflict Minerals Policy

We have adopted the following Conflict Minerals Policy (the “Conflict Minerals Policy”), which is communicated to all of our suppliers and the public:

“Coast Distribution System, Inc. is aware of the violence and human rights violations taking place in connection with the mining of conflict mineral ores in the Democratic Republic of the Congo and surrounding countries (Conflict Region). As a good corporate citizen, Coast Distribution System, Inc. respects human rights and will not contribute to conflict in this area.

In compliance with Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, Coast Distribution System, Inc. is undertaking due diligence actions that are designed to ensure that any tin, tantalum, tungsten or gold in our products are not sourced from mines in the Conflict Region controlled by non-government military groups or unlawful military factions. We expect our suppliers to do the same.”

A copy of our Conflict Minerals Policy is publicly available on our website located under the Products tab at www.coastdistribution.com.

Reasonable Country of Origin Inquiry

During the 2014 reporting period, we evaluated our products and supply chain and determined that certain products we contract to manufacture contain one or more conflict minerals that are necessary to the functionality of those products. As a result of our product analysis and pursuant to Rule 13p-1, we conducted a good faith RCOI regarding the conflict minerals.

The RCOI was conducted with the suppliers for the products that we determined had conflict minerals. The suppliers were contacted and requested to provide conflict minerals data in the Conflict Minerals Reporting Template, a standardized reporting template provided by the Electronic Industry Citizenship (“EICC”) and the Global e-Sustainability Initiative (“GeSI”) (the “Template”). The Template was developed to facilitate disclosures and communication of information regarding smelters that provide material to a company’s supply chain. We received just under 100% of responses back from our suppliers. After a thorough RCOI, we could not make a determination as to the country of origin of all conflict minerals contained in our products.

Due Diligence Process

As a result of our RCOI and pursuant to Rule 13p-1, we conducted due diligence on the source and chain of custody of the conflict minerals determined to be in our products. The design of our conflict minerals due diligence process described below conforms in all material respects with the internationally recognized due diligence framework set forth in the 2nd Edition of The Organisation for Economic Co-operation and Development (the “OECD”) Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High Risk Areas, as further set out in the specific guidance contained in the Supplement on Tin, Tantalum, and Tungsten and the Supplement for Gold (collectively, the “OECD Guidance”).

Our conflict minerals due diligence process includes: adopting a Conflict Minerals Policy, establishing strong internal management systems, identifying and assessing risks in our supply chain, designing and implementing a strategy to respond to the identified risks, utilizing industry efforts to influence smelters and refineries to get audited and certified, and publicly reporting on our supply chain due diligence policies and practices.

Step 1 – Company Management Systems

We have established a strong company management system for complying with the Rule, such as:

• Adopting a comprehensive Conflict Minerals Policy related to the sourcing of conflict minerals that has been clearly communicated to our suppliers and the public.

• Designating a conflict minerals program manager who is leading the implementation of our conflict minerals compliance strategy.

• Establishing a system of controls and transparency over our supply chain using the EICC/GeSI Conflict Minerals Reporting Template.

• Relying on industry guidelines to help establish programs within the Company and with suppliers, such as the EICC and GeSI.

• Implementing mechanisms so that employees and suppliers can report violations of our Conflict Mineral Policy.

• Providing training to employees and to our compliance personnel on our Conflict Minerals Policy.

2

Step 2 – Identify and Assess Risks in the Supply Chain

We identified that one of our primary risks is the lack of direct relationship with smelters and refiners. We could be more susceptible to inaccurate information and partial responses from our suppliers based on our distance from these smelters and refiners. Additionally, the lack of direct relationship with smelters and refiners prevents us from performing direct audits on them. While we acknowledge these risks, we understand the value in being able to trace materials back to their mine of origin and in having transparency over our mineral supply chain. Specific measures have been established by us (as described in Step 3) to minimize this risk and ensure compliance with the Rule.

Step 3 – Design and Implement a Strategy to Respond to Risks

The following is a summary of our strategy to minimize and respond to risks in our supply chain, as well as steps the Company will undertake during the 2015 reporting period to further improve its due diligence process:

• Evaluate all current suppliers based on their responsiveness to our data collection efforts. Those suppliers who provide products with any risk of conflict mineral content that requires reporting and whose response was limited or non-existent for calendar year 2014, will be considered for replacement if they are unable to supply the requested data for calendar year 2015.

• Take actions designed to ensure that all potential new suppliers (i) comply with our Conflict Minerals Policy, (ii) provide accurate information regarding conflict minerals, and (iii) timely respond to inquiries for conflict mineral data.

• Contact suppliers and encourage them to utilize smelters that have obtained a conflict free designation from an industry program, such as the EICC/GeSI Conflict Free Smelter Program (“CFSP”).

• Enhance supplier communication, training and evaluation process to improve due diligence data accuracy and completion.

Step 4 – Independent Third-Party Audit of Supply Chain

We have not obtained an independent third-party audit on our due diligence process nor is it required for us to do so at this time pursuant to Rule 13p-1.

Step 5 – Report on Supply Chain Due Diligence

This CMR constitutes our annual report on our supply chain due diligence policies and practices. It is available under the Products tab on our website at www.coastdistribution.com.

Due Diligence Results

Suppliers

We contacted all our suppliers and requested that they provide us with their conflict minerals sourcing data pursuant to the questions in the Template. From the responses of our suppliers we were able to obtain the name of only one smelter.

Smelters

To date we have been able to identify only one smelter, PT Koba Tin (CFSP ID# 2IDN036). One or more additional smelters may be identified as part of our data collection process and our continued due diligence efforts in future years. We rely upon industry efforts, such as those under the Conflict Free Sourcing Initiative, to influence smelters and refineries to get audited and certified through the CFSP.

3

Products

A list of our products that are subject to the conflict mineral reporting requirements of Form SD is set forth in Table 1 below.

Facilities Used to Process Minerals

We have performed a comprehensive analysis of our product components, and the role that suppliers play throughout our manufacturing and product delivery processes. We defined the scope of our conflict minerals due diligence by identifying and reaching out to our current suppliers that provide components or engage in manufacturing activities that are likely to contain conflict minerals.

Efforts to Determine Location or Origin

The Company supports the CFSP, which is focusing on smelters as a choke point in the global metals supply chain through which all ores must pass. We intend to work with our suppliers to achieve sourcing of conflict minerals only from CFSP certified conflict-free smelters and refiners. Our participation in the CFSP constitutes the industry-standard method of determining the mine or location of origin with the greatest possible specificity because, once ores are smelted or refined, it is not possible to trace back to the mine or location of origin.

Country of Origin

The countries of origin of any conflict minerals necessary to the functionality of our products have not been identified.

Conclusion

We have no reason to believe that conflict minerals necessary to the functionality or production of our products directly or indirectly finance or benefit armed groups in the Covered Countries. However, because we have not received adequate responses from all affected suppliers, we are unable to determine all of the facilities used to process the conflict minerals in these products or the country of origin of those conflict minerals.

Statements and Risk Factors

The statements made in this Report are based on our RCOI and due diligence process performed in good faith. These statements are based on the infrastructure and information available during the reporting period. A number of factors could introduce errors or otherwise affect the information in this Report. These factors include, but are not limited to, incomplete, erroneous or omitted supplier or smelter data; the pending definition of “smelter”; confusing language contained in the SEC regulations; insufficient supplier and smelter education and knowledge during this second year of compliance with SEC regulations; timeliness of data; public information not discovered during a reasonable search; errors in public data; language barriers and translation issues; oversights or errors in conflict-free smelter audits; sourced materials from Covered Countries being declared secondary materials; companies going out of business during 2014; certificate programs not being equally advanced for all industry segments and metals; and smuggling of conflict minerals to countries beyond the Covered Countries.

4

Table 1 - Product Description

Product No.		Description				Product No.		Description
31568		26K CROSS MEMBER				31350		5TH WHEEL DISPLAY STAND
31567		16K CROSS MEMBER				31370		WD DISPLAY STAND
31249		LIFT UNIT ASSEMBLY				33842		SWAY CONTROL BALL
31569		16K HITCH HOUSING/YOKE/HEAD				33844		BALL 1-7/8X3/4X1-3/4 CHROME
31570		26K HITCH HOUSING/YOKE/HEAD				33846		BALL 1-7/8X1X2/1/8 CHROME
30506		DRAW BAR 800LB RND W/CHAINS				33849		BALL 2 X 3/4 X1-3/4 CHROME
30546		DRAW BAR 1200LB RND W/CHAINS				33850		BALL LS 2X3/4X2-5/16 CHROME
30550		DRAW BAR 1400LB RND W/CHAINS				33851		BALL 2X1X2-1/8 CHROME
31371		CHAIN KIT FOR WD KITS				33852		BALL LS 2X1X2-7/8 CHROME
31671		HEAD BOLT				33853		BALL 2X1-1/4X2-5/8 CHROME
31976		1/2-13UNC X 3.75 HEX HEAD BOLT				33855		BALL 2-5/16X1X2-1/8 CHROME
32060		SHANK				34915		BALL 1-7/8X3/4X1-3/4 CHR PAK/1
32061		HEAD ASSEMBLY F/RND BAR HITCH				34917		BALL 2X3/4X1-3/4 CHR PAK/1
32062		LIFT UNIT ASSEMBLY				34918		BALL 2X1X2-1/8 CHR PAK/1
32063		HANDLE				34919		BALL 2-5/16X1X2-1/8 CHR PAK/1
32064		HARDWARE KIT F/ROUND BAR WD				34924		BALL LS 2X1X2-7/8 CHR PAK/1
40321		LEVEL MULTI-SURFACE (40482)				39386		BALL 2-5/16X1-1/4X2-5/8 CHR
68665		RUBBER ROOF KIT (65213)				30849		1200LB WDH W/SWAY/BALL-2-5/16
31285		BALL 2-5/16X1-1/4 12K (39386)				31331		501-800# WDH P-TRUNNION
31972		BALL 2X1-1/4X2-5/8-UNASSEMBLED				31335		801-1200# WDH P-TRUNNION
31998		SCREW KIT PK/8				31421		400-600# WDH RD BAR
98679		BOX ONLY FOR HB3000				31422		501-800# WDH RD BAR
98680		SKIN ONLY FOR HB3000				31423		801-1200# WDH RD BAR
13339		BATTERY STRAP KIT,42IN BULK				31425		1001-1400# WDH RD BAR
20566		T VALVE LOWER V4,1EA REG ABS				31427		501-800# WDH L/SHANK RB
20567		T VALVE UPPER V4,1EA REG ABS				31428		801-1200# WDH L/SHANK RB
20568		COUPLER SWIVEL V4,1EA PP MAT’L				31620		800# WDH TRUN W/SWAY & BALL
20569		COUPLER NUT V4,1EA POLY MAT’L				31621		1200# WDH TRUN W/SWAY & BALL
20570		O-RING ADAPTER V4 1EA, ABS MAT				31986		600LB WDH W/SWAY/BALL-2-5/16IN
20571		REAR WHEEL SPACER, WHITE				31995		600LB WDH W/SWAY/BALL-2IN
20806		V6 COUP NUT BUTTRESS ABS,BLK				31996		800LB WDH W/SWAY/BALL 2IN
90117		CARDS F/65485 FAN BLADES				31997		800LB WDH W/SWAY/BALL 2-5/16
90118		BLISTER FOR FAN BLADES				31313		16K-S 5TH WHEEL HEAD/X-MEMBER
20657		SGL LED EC-LTE,BWHT,OPT NO BLB				31452		REPL XS-16 CROSS MEMBER KIT
20658		DBL LED EC-LTE,BWHT,OPT NO BLB				31453		REPL XS-16 HEAD ASSEMBLY KIT
20659		LED SCARE LITE,BWHT,CLR NO BLB				31454		REPL XS-16 HANDLE KIT
20660		LED PORCH LITE,BWHT,CLR NO BLB				31455		XS-16 COMPLETE HARDWARE KIT
20661		LED P-LTE,BWHT,CLR W/SW NO BLB				31456		HEAD PIN FOR 16K-S/16K
20662		SGL LED EU-LTE,BWHT,WHT NO BLB				31458		XS-16 CROSS MEMBER HDWE KIT
20663		SGL LED EU-LTE,BWHT,OPT NO BLB				31314		16K 5TH WHEEL UPRIGHTS BX/2
20664		DBL LED EU-LTE,BWHT,WHT NO BLB				30001		TRI-BALL ADJ BALL MOUNT HUSKY
20666		DBL LED EU-LTE,BWHT,OPT NO BLB				31341		BALL MT CLS II 6-5/8X5/8X1-1/4
20717		SGL LED EU-LITE,SFT,OPT NO BLB				31342		BALL MT CLII 7-7/8X2-1/4X2-7/8
20718		DBL LED EU-LITE,SFT,OPT NO BLB				31349		BALL MOUNT TRIPLE BALL
20721		SGL LED EU-LITE,SFT,WHT NO BLB				31354		BALL MT DOUBLE TOW BULK HUSKY
20722		DBL LED EU-LITE,SFT,WHT NO BLB				31357		BALL MT CLS III 8X3/4X2
20723		SGL LED EC-LITE,SFT,OPT NO BLB				31358		BALL MT CLS III 10X3X4-1/4

Table 1 - Product Description

Product No.		Description				Product No.		Description
20724		DBL ECON LITE,SOFT,OPT NO BULB				31359		BALL MT CLSIV 6-3/4X2X3-1/4
51241		SGL LED EU-LTE,BWHT,OPT NO BLB				31360		BALL MT CLS III 9X1X2-1/4
51242		DBL LED EU-LTE,BWHT,OPT NO BLB				31361		BALL MT CLS II 9”L 8”D
51261		SGL LED EU-LT,BW/WHT,DIM NOBLB				31362		BALL MT CLS IV 10-1/2X1X2-1/4
51262		SGL LED EU-LT,BW/OPT,DIM NOBLB				31363		BALL MT CLS III 11-1/2X4-3/4X6
51263		DBL LED EU-LT,BW/WHT,DIM NOBLB				31364		BALL MT CLS IV STGHT 8X3/4X2
51264		DBL LED EU-LT,BW/OPT,DIM NOBLB				31366		BALL MT KIT 2IN BALL 2IN DROP
17139		TRIANGULAR ADPT 30F-15M(13995)				31367		BALL MT KT 2IN BALL 3-1/4”DROP
20405		1/2 X 25’ WATER HOSE (20150)				31369		BALL MT CLASS IV 12X1X2-1/4
20410		1/2 X 15’ WATER HOSE (27294)				31412		CUSTOM BRACKET KIT FORD
27294		AQUA PRO WATER LINE,1/2”X15’				31413		CLAMP-ON BRKT KIT DODGE ALL
27888		WTR FILL REC PLAST P/WHT CD/1				31415		CUSTOM BRACKET KIT CHEVY ALL
20150		AQUA PRO WATER LINE,1/2” X 25’				31368		HUSKY GOOSENECK
20151		AQUA PRO WATER LINE,1/2” X 50’				31196		HUSKY 10-16K GLIDER 3/BOX SET
21317		AQUA PRO WATER LINE,5/8” X 25’				31745		KIT,SERV,H10-16K DS H&R ASSEM
21318		AQUA PRO WATER LINE,5/8” X 50’				31748		KIT,SERV,H10-16K PS H&R ASSEM
14059		ADAPTER 30F-15M CIRCULAR CD/1				31751		KIT,SERV,H10-16K HNDL & HDWARE
14061		ADAPTER 15F-30M CIRCULAR CD/1				31752		KIT,SERV,H10-16K BOLT&WASH HWR
14063		ADAPTER 50F-15M CIRCULAR CD/1				31789		KIT,SERV,H10-16K GLIDING PAD
65141		A/C HARD WIRE KIT TENT CAMPER				31795		KIT,SERV,H10-16K COMP CYL ASSY
10705		SCARE LIGHT W/CLR LENS BULK				31796		KIT,SERV,H10-16K PS FLIP ASSY
11587		LENS EURO LIGHT/FLEETWOOD				31797		KIT,SERV,H10-16K CLEV/COT PIN
11824		ECONOMY LIGHT OPTIC SGL CD/1				31803		KIT,SERV,H10-16K PIV PLT ASSY
11825		ECONOMY LIGHT OPTIC DBL CD1				31804		KIT,SERV,H10-16K RAIL SP &HDWR
11826		LENS F/ECON OPTIC LIGHT				31805		KIT,SERV,H10-16K PIV RET SPR
13812		FLUORESCENT LIGHT 16W DLB TUBE				31806		KIT,SERV,H10-16K BUMP STOP HWR
13813		FLUORESCENT LIGHT 30W DLB TUBE				32042		HUSKY 10-26K GLIDER 3/BOX SET
14655		ECONOMY LIGHT WHT SGL CD/1				32043		SHIM KIT (THIN)
14656		ECONOMY LIGHT WHT DBL CD/1				32044		KIT, SERV, HUSKY 10 PULL HNDLE
14813		LENS F/ECONOMY LIGHT BULK				32045		KIT,3/8” HDWE KIT FOR H10 HNDL
16193		SCARE LIGHT W/CLR LENS CD/1				32046		KIT,SERV, HUSKY 10 GLIDING PAD
16747		BULB #JC10W HALOGEN CD/2				32047		KIT,SERV,H10 COMP CYL ASSY
16748		FLUORESCENT TUBE F15T8/CW PK/2				32048		KIT,SERV,H10 HANDLE RET SPRING
16749		FLUORESCENT TUBE F8T5/CW PAK/2				32049		KIT,SERV,H10 PS PIVOT ASSEMBLY
17925		EURO LIGHT C/WHT-WHT SGL CD/1				32050		KIT,SERV,H10 CLEVIS/COTTER PIN
17926		EURO LIGHT C/WHT-WHT DBL CD/1				32051		KIT,SERV,H10 PIVOT PLATE ASBLY
18014		EURO LIGHT C/WHT-OPTIC SGL CD1				32053		KIT,SERV,H10 HOUSING HDWR 1/2”
18015		EURO LIGHT C/WHT-OPTIC DBL CD1				32054		KIT,H10 END TUBE PLUGS BAG/2
18016		LENS F/EURO LITE WHITE CD/1				32056		KIT,SERV,H10 PIVOT RET SPRING
18017		LENS F/EURO LIGHT OPTIC CD/1				32058		PIVOT PLATE HARDWARE SERV KIT
18102		PORCH LIGHT WHT-CLR CD/1				32059		KIT, SERVICE, CENTER BOLT
18104		PORCH LIGHT WHT-CLR-SW CD/1				30003		BASE RAIL CLEVIS PIN, BAG/4
18106		LENS F/PORCH LIGHT CLEAR				30004		BASE RAIL 5/8 HAIR PIN BAG/4
18107		LENS F/PORCH LIGHT AMBER				30562		10 BOLT KIT DGE 1500 02-08
18109		PORCH LIGHT WHT-AMB CD/1				30575		10 BOLT DGE TUBE SPACER KIT
18111		PORCH LIGHT WHT-AMB-SW CD/1				30582		10 BOLT KIT DGE 2500/3500
18121		EURO LIGHT WHT-WHT SGL CD/1				30597		10 BOLT TUBE SPACER KIT TUNDRA

2

Table 1 - Product Description

Product No.		Description				Product No.		Description
18122		EURO LIGHT WHT-OPTIC SGL CD/1				30600		10 BOLT TUBE SPACER KIT TUNDRA
18123		EURO LIGHT WHT-WHT DOUBLE CD/1				30607		4 BOLT KIT FORD
18124		EURO LIGHT WHT-OPTIC DBL CD/1				30619		4 & 10 BOLT KIT FORD
18530		LENS F/ECONOMY LIGHT CD/1				30640		4 BOLT RAIL ADAPTER KIT
51251		PORCH LIGHT WHT,CLR,WO/SW CD/1				30665		4 BOLT RAIL ADAPTER KIT DGE
51252		PORCH LIGHT WHT,CLR,W/SW CD/1				31385		STRAIGHT“L” BRKT SERVICE KIT
51299		LENS FOR NEW PORCH LIGHT CD/1				31401		ANGLE BRACKET REPLACEMENT KIT
11533		EXTENSION CORD 30A 25FT W/HAND				31417		WHEEL BOLT KIT PKG/8
11534		EXTENSION CORD 30A 50FT W/HAND				31418		HARDWARE SERVICE KIT
11535		EXTENSION CORD 50A 30FT W/HAND				31563		UNIVERSAL 4-BOLT INSTALL KIT
11827		ARCON GENERATOR ADPT L5-30				31622		10 BOLT RAIL INSTALL KIT
11828		ARCON GENERATOR ADPT L5-30				31712		7/8” SPACER BLOCK KIT BAG/4
13218		ADAPTER 30A-15A ROUND CSA CD/1				31728		PULL HANDLE & PIN SERV KIT
13333		ADAPTER 30A-15A ROUND CSA BULK				31419		BASE RAIL SPACER KIT
13993		ADAPTER 30A-15A TRI CSA CD/1				80179		REPLACEMENT BOARD AND FOBS
13995		ADAPTER 30A-15A TRI CSA BULK				81489		MOTOR, SP2500 AND SP3000 JACK
14014		ROUND ADAPTER 50F-30M				81490		MOTOR, SP3500 JACK
14018		ROUND ADAPTER 30F-50M				81492		SP 2500 UPPER JACK ASSEMBLY
14053		ADAPTER 15F-30M TRIANGULR CD/1				81493		SP 3000 UPPER JACK ASSEMBLY
14054		ADAPTER 15F-30M TRIANGULR BULK				81494		SP 3500 UPPER JACK ASSEMBLY
14057		ADAPTER 15F-30M DLX ROUND CD/1				81495		SP 3000 LOWER JACK ASSEMBLY
14058		ADAPTER 15F-30M DLX ROUND BULK				81496		SP 3500/2500 LOWER JACK ASMBLY
14081		ADAPTER 30F-15M 90 DEG PK/1				81497		UNIV CONNECTOR STORAGE KIT
14082		ADAPTER 30F-15M 90 DEG BULK				81915		SP 2500 UPPER COVER KIT
14237		PIGTAIL 30F-STRIPPED 18IN				81916		SP 3000 UPPER COVER KIT
14238		PIGTAIL 30M-STRIPPED 18IN				81917		SP 3500 UPPER COVER KIT
14239		PIGTAIL 15F-30M 18IN				82019		BALL SCREW WITH NUT ONLY
14240		PIGTAIL 30F-15M 18IN				82020		ACME SCREW WITH NUT ONLY
14241		PIGTAIL 30F-50M 18IN				82031		OPERATING SWITCH HSB
14242		PIGTAIL 50F-30M 18IN				82032		LIGHT SWITCH HSB
14243		PIGTAIL 30F-50M FLAT WIRE 18IN				82033		GASKETS
14244		PIGTAIL 50F-30M FLAT WIRE 18IN				82045		SET OF PLASTIC COVERS
14245		PIGTAIL 30F-15M 9IN PK/1				82046		KIT, RUBBER COVERS, GASK, GROM
14246		PIGTAIL 30F-15M FLATWIRE 12IN				82066		HSB5000 OPERATING SWITCH
14247		POWER CORD 30M-STRIPPED 25FT				82067		HSB5000 LIGHT SWITCH
14248		EXTENSION CORD 30A 25FT				87450		HB3000 UPPER JACK ASSEMBLY
14249		EXTENSION CORD 30A 50FT				87451		HB4500 UPPER JACK ASSEMBLY
14250		POWER CORD 50A-STRIPPED 25FT				87452		OPERATING SWITCH HB3000,HB4500
14362		PIGTAIL 15F-30M 18IN PK/1				87453		LIGHT SWITCH HB3000,HB4500
14363		PIGTAIL 30F-STRIPPED 18IN PK/1				87454		SWITCH BOOTS-2PK HB3000,HB4500
14365		PIGTAIL 30F-15M 18IN CD/1				87455		LED WORK LIGHTS W/ RUB SEALS
14366		PIGTAIL 30F-15M FW 12IN PK/1				87456		BRAKE/CRANK COVERS W/RUB SEALS
14367		PIGTAIL 30F-50M 18IN PK/1				87457		MOTOR HB3000 AND HB4500
14368		PIGTAIL 30F-50M FW 18IN PK/1				87458		BRAKE FOR HB3000 AND HB4500
14369		PIGTAIL 30M-STRIPPED 18IN PK/1				87459		HB3000 LOWER JACK ASSEMBLY
14370		PIGTAIL 30F-15M 9IN				87460		HB4500 LOWER JACK ASSEMBLY
14371		PIGTAIL 50F-30M 18IN PK/1				87461		ADJUSTABLE LEG W/FOOT PAD

3

Table 1 - Product Description

Product No.		Description				Product No.		Description
14372		PIGTAIL 50F-30M FW 18IN PK/1				87462		BRAKE RELEASE HAND & MAN CRANK
14398		GENERATOR ADAPTER,ROUND 30AMP				87490		HB3000-2 LOWER JACK ASSEMBLY
14977		GENERATOR PIGTAIL ADPT,30AMP				87491		FOOT PAD F/2” 3000#
17341		ARCON MULTI-MAX ADAPTER				87526		MANUAL RESET CIRCUIT BREAKER
17360		GENERATOR CORD TRI-SOURCE ADPT				87637		HB3000 SMARTSTOP UPPER JACK AS
17361		GENERATOR ADPTR-L5-30P/2X5-20R				87638		HB4500 SMARTSTOP UPPER JACK AS
17362		GENERATR ADPTR-L14-30P/2X5-20R				87639		BRK.RELS.HAND&MAN.CRNK.SMRTSTP
18203		30AMP REPLACEMENT PLUG CD/1				87640		CONNECTOR STORAGE KIT
18206		30AMP REPL RECEPTACLE CD/1				87642		UPPER PLSTC.CVR.KIT F/HB4500
19186		50A MALE CORD END				87643		UPPER PLSTC.CVR.KIT F/HB3000
19194		50A FEMALE CORD END				87644		UPPER PLSTC.CVR.KIT F/HB3000/2
20667		SGL LED EC-LITE,BWHT,OPT LENS				87645		LOWER PLSTC.CVR.KIT
20668		DBL LED EC-LITE,BWHT,OPT LENS				87658		HB4500 REMOTE UPPER JACK ASSY
20669		SGL LED EU-LITE,BWHT,OPT LENS				82022		ELEC JACK SUPER BRUTE 5K W/REM
20670		DBL LED EU-LITE,BWHT,OPT LENS				82084		ELEC JACK SUPER BRUTE 4K
20671		LED SCARE LIGHT,BWHT,CLR LENS				87247		ELECTRIC JACK-BRUTE HB4500
20672		LED PORCH LIGHT,BWHT,CLR LENS				87248		ELECTRIC JACK-BRUTE HB3000
20673		LED PRCH LITE W/SW,BWHT,C-LENS				87641		ELEC JACK-BRUTE W/REMOTE
20711		SGL LED EU-LITE,SWHT,OPT LENS				81079		SLIDE-OUT STABIL 17”-29” PAIR
20712		DBL LED EU-LITE,SWHT,OPT LENS				81080		SLIDE-OUT STABIL 21”-38” PAIR
20713		SGL LED EU-LITE,SWHT,WHT LENS				81081		SLIDE-OUT STABIL 27”-49” PAIR
20714		DBL LED EU-LITE,SWHT,WHT LENS				31974		1000# SIDE WIND JACK CAP
20715		SGL LED EC-LITE,SWHT,OPT LENS				31975		2000# SIDE WIND JACK CAP
20716		DBL LED EC-LITE,SWHT,OPT LENS				70135		SCISSORS JACKS - 28IN, BX/2
20725		SGL LED EU-LITE,BWHT,WHT LENS				72138		RPL SCISSOR JACK-20”
20726		DBL LED EU-LITE,BWHT,WHT LENS				72139		RPL SCISSOR JACK-24”
51265		SGL LED EU-LT,BW/WHT LENS,DIMM				72140		RPL SCISSOR JACK-28”
51266		SGL LED EU-LT,BW/OPT LENS,DIMM				75203		5TH WHEEL STABILIZER ADJ
51267		DBL LED EU-LT,BW/WHT LENS,DIMM				76850		SPEED HANDLE
51268		DBL LED EU-LT,BW/OPT LENS,DIMM				76862		SCISSORS JACKS -24IN, BX/2
81264		PULL DOWN WAND				76942		5TH WHEEL STABILIZER
48731		SURFACE MOUNT BASE				77713		SCISSORS JACKS -20IN, BX/2
48732		RECESSED BASE-ROUND				87070		COUPLER 1-7/8”BALL 2”W W/CHAIN
48733		RECESSED BASE-SQUARE				87071		COUPLER 1-7/8”BALL 2.5”W W/CHN
65264		STEP STABILIZER				87072		COUPLER 1-7/8”BALL 3”W W/CHAIN
51221		SGL LED EU-LITE,BWHT,OPT LENS				87073		COUPLER 2”BALL 2”W W/CHAIN
51222		DBL LED EU-LITE,BWHT,OPT LENS				87074		COUPLER 2”BALL 2.5”W W/CHAIN
51225		FLUORESCENT TUBE F15T8/CW PK/2				87075		COUPLER 2”BALL 3”W W/CHN 3500#
51226		PORCH LIGHT WHT-CLR-SW CD/1				87076		COUPLER 2”BALL 3”W W/CHN 6000#
51227		FLUORESCENT TUBE F8T5/CW PAK/2				87077		COUPLER 2” A-FRAME W/CHAIN
51228		LENS F/PORCH LIGHT AMBER				87079		COUPLER 2” A-FRAME, FLAT LOCK
51229		PORCH LIGHT WHT-CLR CD/1				87080		COUPLER 2 5/16” A-FRAME, 10K#
51230		LENS F/PORCH LIGHT CLEAR				87081		COUPLER 2 5/16” A-FRAME, 14K#
51231		LENS F/EURO LITE WHITE CD/1				87082		COUPLER REPAIR KIT 1-7/8”
51232		EURO LIGHT WHT-OPTIC DBL CD/1				87083		COUPLER REPAIR KIT 2”, 3500#
51233		EURO LIGHT WHT-OPTIC SGL CD/1				87084		COUPLER REPAIR KIT 2”, 5000#
51234		EURO LIGHT WHT-WHT DOUBLE CD/1				34842		TONGUE BALL PLATE
51235		EURO LIGHT WHT-WHT SGL CD/1				34845		BALL MOUNT BAR
51236		LENS F/EURO LIGHT OPTIC CD/1				34846		SLIDE BAR
51237		PORCH LIGHT WHT-AMB CD/1				34847		HANDLE F/HUSKY SWAY CONTROL

4

Table 1 - Product Description

Product No.		Description				Product No.		Description
51238		PORCH LIGHT WHT-AMB-SW CD/1				34853		SPRING CLIP F/SW CONTROL 2/PK
70406		BUMPER PLUG 4IN BULK				71195		REPL SCREW KIT PK/8
79403		BUMPER PLUG 4IN CD/2				10304		PREWIRE 6WAY ZINC 12IN CD/1
48829		FAULKNER MAT CARRY BAG				10305		PREWIRE 7WAY PLAST 12IN CD/1
44021		SERVING TRAY F/DIR.CHAIR BLACK				10547		PREWIRE 7WAY PLASTIC 48IN
48945		SERVING TRAY,NEW BRACKET, BLK				11588		EXTENSION HARNESS,5WAY 2FT
43951		CHAIR BAG BLACK				11952		BRACKET 4/5/6-WAY BLK CD/1
48529		LACING FOR RECLINER WHITE				13215		PREWIRE 7WAY BLADE 12IN,BULK
48531		LACING FOR RECLINER BLACK				13216		PREWIRED 7WAY BLADE 60IN,BULK
48532		LACING FOR RECLINER GREEN				13217		PREWIRED 7WAY BLADE 96IN,BULK
48960		RECL,BEACH SAND MESH WOODEN AR				13220		TOWING CABLE COILED 4-WAY CD/1
48961		RECL, MOCHA WOODEN ARM				13221		TOWING CABLE COILED 6-WAY CD/1
48962		RECL,BLACK MESH				13226		CONNECTOR BRKT UNIV 7PIN CD/1
48963		RECL,PADDED BLACK				13227		CONNECTOR BRKT UNIV 7PIN BULK
48964		RECL,PADDED BLUE				13795		CONNECT 7WAY PREM CAR END BULK
48965		RECL,PADDED GREEN				13796		CONNECT 7WAY PREM CAR END CD/1
48966		RECL,PADDED GREEN/BLACK				14621		CONNECTOR 4WAY ZINC CAR END
48967		RECL,PADDED RED/BLACK				14622		CONNECTOR 4WAY ZINC TRL END
48968		RECL,PADDED BLUE/BLACK				14623		CONNECT 4WAY ZINC CAR END CD/1
48969		RECL,PADDED CHECKERED				14624		CONNECT 4WAY ZINC TRL END CD/1
48970		RECL,BEACH SAND MESH XL				14626		CONNECTOR 6WAY ZINC CAR END
48971		RECL, MOCHA WOODEN ARM XL				14627		CONNECTOR 6WAY ZINC TRL END
48972		RECL,BLACK MESH XL				14628		CONNECT 6WAY ZINC CAR END CD/1
48973		RECL,PADDED BLACK XL				14629		CONNECT 6WAY ZINC TRL END CD/1
48974		RECL,PADDED BLUE XL				14630		BRACKET 4,5,6WAY ZINC CD/1
48975		RECL,PADDED GREEN XL				14631		CONNECTOR 7WAY METAL CAR END
48976		RECL,PADDED GREEN/BLACK XL				14632		CONNECTOR 7WAY METAL TRL END
48977		RECL,PADDED RED/BLACK XL				14633		CONNECT 7WAY MET CAR END CD/1
48978		RECL,PADDED BLUE/BLACK XL				14634		CONNECT 7WAY MET TRL END CD/1
48979		RECL,PADDED CHECKERED XL				14636		CONNECTOR 7WAY PLAST CAR END
45637		MAT,SUMMER WAVES 8X16 GRN/BLUE				14794		BRACKET 4,5,6WAY ZINC BULK
45638		MAT,SUMMER WAVES 8X16 TAN GOLD				14797		CONNECTOR 6WAY PLAST TRL END
46258		MAT,SUMMER WAVES 8X16 BLACK				14798		CONNECTOR 6WAY PLAST CAR END
46294		MAT,SUMMER WAVES 8X20 GRN/BLUE				14800		CONNECTOR 4WAY CHR TRL END
46322		MAT,SUMMER WAVES 8X20 TAN GOLD				14801		CONNECTOR 4WAY CHR CAR END
46341		MAT,SUMMER WAVES 8X20 BLACK				14805		BRACKET 7WAY ZINC BULK
46354		MAT, MIRAGE 8X16 SILVER GOLD				14808		BRACKET 7&9WAY ZINC BULK
46361		MAT, MIRAGE 8X16 BURGUNDY				15417		CONNECTOR 4WAY CHROME CD/1
46362		MAT, MIRAGE 8X20 SILVER GOLD				15418		CONNECT 4WAY CHR CAR END CD/1
46363		MAT, MIRAGE 8X20 BURGUNDY				15419		CONNECT 4WAY CHR TRL END CD/1
46502		MAT, INDEPENDENCE DAY 8X20				18046		BRACKET 4,5,6WAY BLACK CD/1
46503		MAT, INDEPENDENCE DAY 9X12				18047		BRACKET 7&9WAY BLACK CD/1
46504		MAT, WILD MUSTANG 9X12 BLK/SIL				18048		BRACKET 4,5,6WAY BLACK BULK
46506		MAT, WILD MUSTANG 9X12 BLUE				18049		BRACKET 7&9WAY BLACK BULK
46507		MAT, WILD MUSTANG 9X12 BROWN				18298		PREWIRE 6WAY ZINC 12IN
46508		MAT,WILD MUSTANG 9X12 BURGANDY				18299		PREWIRE 7WAY PLASTIC 12IN
46945		MAT, WILD MUSTANG 9X12 GREEN				30100		BALL COVER,1-7/8-2 BLK
48430		MAT, MONTE CARLO 6X9 BEIGE				31279		BALL COVER,1-7/8-2 RED
48448		MAT, MONTE CARLO 6X9 BLUE				11859		HARDWARE KIT 6WAY
48449		MAT, MONTE CARLO 6X9 GREEN				11860		HARDWARE KIT 7&9 WAY
48450		MAT, MONTE CARLO 9X12 BEIGE				32256		5TH WHEEL LUBE DISC 12” 6.25MM
48451		MAT, MONTE CARLO 9X12 BLUE				33862		5TH WHEEL LUBE DISC 8INCH
48453		MAT, MONTE CARLO 9X12 GREEN				34818		HITCH LOCK 5/8”
48464		MAT, MONTE CARLO 8X20 BEIGE				34819		HITCH LOCK 1/2”
48465		MAT, MONTE CARLO 8X20 BLUE				34914		5TH WHL LUBE DISC HD 10INCH
48486		MAT, MONTE CARLO 8X20 GREEN				38443		REC COVER 2IN PRESS-IN

5

Table 1 - Product Description

Product No.		Description				Product No.		Description
48695		MAT, VINEYARD 6X9 BEIGE				38444		REC COVER 1-1/4IN PRESS-IN
48698		MAT, VINEYARD 6X9 BLUE				38445		REC COVER,CHR 2”BULK
48699		MAT, VINEYARD 6X9 GREEN				38446		REC COVER,BLK 2”BULK
48700		MAT, VINEYARD 9X12 BEIGE				38790		5TH WHEEL LOCK
48701		MAT, VINEYARD 9X12 BLUE				38958		COUPLER LOCK CD/1
48702		MAT, VINEYARD 9X12 GREEN				17929		MAG TOWING LIGHTS HUSKY
48703		MAT, VINEYARD 8X20 BEIGE				39585		SWAY CONTROL BALL MT ADAPTER
48704		MAT, VINEYARD 8X20 BLUE				70564		STABILIZER JACK,ADJ SET/2
48705		MAT, VINEYARD 8X20 GREEN				19356		TRAILER END CONNECTOR KIT 8’
48707		MAT, FINISH LINE 6X9				19430		TRAILER END CONNECTOR KIT 12’
48708		MAT, FINISH LINE 9X12				13034		BATTERY BOX GRP 24 BLACK
48709		MAT, FINISH LINE 8X20				13035		BATTERY BOX GRP 27 BLACK
48823		WORK&PLAY MAT,FINISH LINE36X68				13228		BATTERY BOX GRP GC-2 BLACK
48824		WORK&PLAY MAT,BEIGE,VNYD36X68				19216		BATTERY CHARGER 12V 2A
31574		PIVOT PIN KIT FOR 16KW & 26KW				19674		PH TC2-P 12V/2A CHARGER
31575		CROSS BEAM HDWE KIT F 16&26KW				80205		POWERHOUSE GENERATOR COVER M1
31576		BASE RAIL HDWE KIT F 16&26KW				80206		POWERHOUSE GENERATOR COVER LG
31577		CROSS MEMBER KIT FOR 26KW				80208		POWERHOUSE GENERATOR COVER S
31839		26K W HARDWARE KIT				80443		GENERATOR COVER - S(500WI)
31580		CROSS BEAM KIT FOR 16KW				80445		GENERATOR COVER - M1(1000WI)
31390		CENTER-LINE HEAD 500#-1400#				80446		GEN COVER- LG 2000WI&PH2100PRI
31393		CENTER-LINE SPRING BAR BRKT RH				80457		GENERATOR COVER - XL(PH3100RI)
31394		CENTER-LINE SPRING BAR BRKT LH				80505		GENERATOR COVER, PH6500RI
31447		KIT CENTER-LINE COMPLETE HDWE				11796		BATT STRAP 54IN W/BRKTS
31448		KIT CENTER-LINE DS TRUNNION				12024		BATT STRAP,42IN W/BRKTS
31449		KIT CENTER-LINE PS TRUNNION				60370		GENERATOR-500WI INVERTER
31450		KIT CENTER-LINE PRESSURE PLATE				60376		GENERATOR-2000WI INVERTER
31459		CENTER-LINE CUSTOMER SHIM KIT				61356		GENERATOR-1000WI INVERTER
31552		CENTER LINE FORGED SHANK				63650		GENERATOR-3600W OPEN FRAME
31573		HANDLE KIT FOR 16KW & 26KW				64211		GENERATOR-4000W INV EFI W/LCD
31578		HEAD AND YOKE KIT FOR 26KW				64229		GENERATOR-PH6500RI-NEW
31579		HANDLE GRIP KIT FOR 16&26KW				69271		GENERATOR-2100W INVERTER P&R
31581		HEAD AND YOKE KIT FOR 16KW				69272		GENERATOR-2700W INVERTER P&R
31672		L-BRACKET CHAIN AND PIN KIT				69273		GENERATOR-3100W INVERTER R
31703		CROSSMEMBER RUBBER BUMPER KIT				69274		GENERATOR-PH6500RI
31705		C/L HEAD ONLY SERVICE KIT				69276		2100/2700 GENSET PARALLEL KIT
31878		CENTER-LINE LIFT TOOL KIT				81199		2500LB POWER JACK, ACME SCREW
32017		C/L SPRING BAR STRAP KIT				81200		3000LB POWER JACK, ACME SCREW
31527		SPRING BAR RETAINER PACK				81201		3500LB POWER JACK, ACME SCREW
37153		SET SCREW 5/8IN				25606		TOTE-N-STOR 11GAL
31511		DRAW BAR CENTER-LINE 500-800#				25951		TOTE-N-STOR 6GAL
31512		DRAW BAR CENTER-LINE 801-1200#				25607		TOTE-N-STOR 15GAL
31513		DRAW BAR CENTER-LINE1001-1400#				25608		TOTE-N-STOR 25GAL
34714		WHEEL CHOCK				25609		TOTE-N-STOR 32GAL
33253		HITCH PIN, 1/2” BULK				20122		TOTE-N-STOR 18GAL 4-WHEEL
33790		HITCH PIN/CLIP 5/8” CD/1				20123		TOTE-N-STOR 25GAL 4-WHEEL
33791		HITCH PIN, 5/8” BULK				20129		TOTE-N-STOR 38GAL 4-WHEEL
33792		SPRING CLIP,BULK 5/8”				25644		TOW BRKT F/TOTE-N-STOR
34521		HITCH PIN/CLIP,1/2” CD/1				65213		RUBBER ROOF KIT, BULK
31395		CUSTOM BRACKET KIT-TITAN				61255		VENT LID VNTLN/ELXR WHT BOX/1
31396		CUSTOM BRACKET KIT CHEVY 1500				61628		VENT LID JENSEN WHITE BOX/1
31397		CUSTOM BRACKET KIT CHEVY ALL				61634		VENT LID OLD ELIXIR WHT BOX/1
31402		CUSTOM BRACKET KIT CHEVY ALL				62712		REFER VENT LID-BLK, N/S DOM
31404		CUSTOM BRACKET KIT DODGE ALL				62718		REFER VENT LID-BLK, NORCOLD
31405		CUSTOM BRACKET KIT FORD				63110		VENT LID JENSEN WHITE BAG/1
31406		CUSTOM BRACKET KIT FORD				63112		VENT LID JENSEN SMOKE BAG/1
31407		CUSTOM BRACKET KIT FORD				63113		VENT LID VNTLN/ELXR WHT BAG/1

6

Table 1 - Product Description

Product No.		Description				Product No.		Description
31408		CUSTOM BRACKET KIT FORD				63115		VENT LID VNTLN/ELXR SMK BAG/1
31409		CUSTOM BRACKET KIT FORD F150				63116		VENT LID OLD ELIXIR WHT BAG/1
31410		CUSTOM BRACKET KIT TUNDRA				63118		VENT LID OLD ELIXIR SMK BAG/1
31414		CUSTOM BRACKET KIT USE W/31404				65479		VENT LID,VNTLN,WHT,LFTIME BX/1
31564		CUSTOM BRKT KIT FORD F150				65483		FAN BLADE 6IN ROUND BORE CCW
31565		CUSTOM BRKT KIT DODGE ALL				65484		FAN BLADE 6IN D BORE CW
31566		CUSTOM BRKT KIT DODGE 2009				65485		FAN BLADE 6IN D BORE CCW
31852		CUSTOM BRACKET KIT GMC/CHEVY				65491		FAN BLADE 6IN RND BORE CCW
31853		“L” BRACKET KIT GMC/CHEVY				65528		REFER VENT LID-PW,N/S DOMETIC
32084		2013 DODGE 2500 4BOLT INST KIT				65529		REFER VENT LID-PW,O/S DOMETIC
32221		CTM BRKT KIT 2013/14 DODGE RAM				65532		REFER VENT LID-P/W,NORCOLD
32222		KIT, SERVICE, 1/2” U-BOLT				69278		VENT LID VNTLN/ELXR WHITE BG/1
32223		KIT, HRDWRE, 2013/14 DODGE RAM				69279		VENT LID VNTLN/ELXR SMOKE BG/1
32224		KIT, SPACER, 2013/14 DODGE RAM				69280		VENT LID VNTLN/ELXR WHITE BX/1
30255		BALL 2-5/16X1-1/4X2-5/8 PAK/1				69282		VENT LID NEW JENSEN95+WHT BG/1
30508		TOW BAR, ADJ 5000# HUSKY				69283		VENT LID NEW JENSEN95+SMK BG/1
30601		BALL 2 X 1 X 1				69284		VENT LID NEW JENSEN95+WHT BX/1
30605		BALL 2-5/16X1-1/4X2				67304		VENT CUSHION WITH PULL STRAP
30678		BALL 2-5/16X1-1/4X2-5/8 CHROME

7